| Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
| Dimension | 18mm |
| Cap Color | Silver |
| Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
| Material | Aluminum for Cap, PTFE/Silicone for Septa |
| Package | 100pcs/Pack |
| Cap type | Open top |
| Septa type | Non-slit |
15/4/2018 · The solvents were filtered before use through a 0.45 µm PTFE membrane (Waters, Milan, Italy). For quantification purposes, the UV detection was conducted at 322 nm for each analyte. Under these conditions, the total run time was 10 min. Empower v.3 software (Waters) was used for setting-up the analysis and for data management.
PTFE (Polytetrafluorethylene). The hydrophobic nature of teflon and its broad chemical compatibility make it the filter of choice for filtration of air and gases, for use as vents and for clarification of acids, bases and solvents. The teflon membrane needs to be prewet with alcohol before aqueous solutions can be filtered.
Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure.
Introduction. MS ® PTFE syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. PTFE Syringe Filter.
Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm. PerkinElmer. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample
The product listed here is a Hydrophobic, polytetrafluoroethylene (PTFE) membrane that is recommended for use with non-aqueous solvents as well as organic-based, highly acidic, or basic samples and solvents. Since the housing material of the PTFE CR Acrodisc Syringe Filter is a hydrophobic polytetrafluoroethylene membrane on a polypropylene support, the lab equipment is well suited for the filtration of gas and/or organic solvents.
Hydrophobic, polytetrafluoroethene (PTFE) membranes are recommended for use with non-aqueous solvents. Organic-based, highly acidic or basic samples and solvents Specifications UNSPSC 41104918 Brand Acrodisc Product Type Filtration Units per Package 50 pk Diameter 25 mm Format Syringe Filter Hold-up Volume < 100 µL Housing Material Polypropylene
Nalgene 25 mm diameter syringe filters (PES, PTFE, Nylon, SFCA, CA, and glass fiber prefilter) are designed to filter 10-100 ml (up to 200 ml with prefilter). Get Price Acrodisc® PSF Syringe Filters - Pall Corporation
With high concentration salts use titanium filters –P/N: 700005378 (SOLVENT FILTERS, Ti, 7pk) When contamination is suspected, can be washed –Backflush with 70% organic solvent (IPA, EtOH or MeOH) in water –10 ml at minimum, with a syringe (luer-lock) Regular (SS) solvent filters –P/N 700003615 (Filter, Solvent Bottle, SS, PKG 1)
CHROMAFIL® Syringe Filters - Teflon (PTFE) Polytetrafluorethylene Hydrophobic membranes For nonpolar liquids and gases Extremely resistant towards all kinds of solvents as well as with strong acids or bases This membrane can be made more hydrophilic by first pre-wetting with alcohol followed by flushing with water Chromafil Chromafil Xtra
Waters Acrodisc, Minispike Syringe Filter, PTFE, 13 mm, 0.45 ?um, Non polar, 1000/case;Polypropylene, < 10 mL Sample Volume, < 14 ?uL Hold up Volume - WAT (Additional S&H or Hazmat Fees May Apply)
Hydrophobic, polytetrafluoroethene (PTFE) membranes are recommended for use with non-aqueous solvents. Organic-based, highly acidic or basic samples and solvents. Specifications UNSPSC 41104918 Brand Acrodisc Product Type Filtration Units per Package 1000 case Diameter 13 mm Format Syringe Filter Hold-up Volume < 30 µL Housing Material
Feb 22, 2022 · This PTFE membrane is a good choice for use with aggresive organic solvents Waters offers scientists and lab managers Acrodisc, Syringe Filter, PTFE, 25 mm, 0.2 µm, Non polar, 50/pk, WAT200504. Shop with us today! Send Inquiry. Get Price.
Wholesales 0.22um syringe filter for solvent prefiltration high performance 0.2um ptfe syringe filter VWR solvent compatibility ptfe 0.2 micron filter exporter unlaminated ptfe 0.22 micron filter for gasses palstic 0.2um ptfe syringe filter on stock Tel:8618057059123
Introduction. MS ® hydrophilic PTFE syringe filters are using special hydrophilic PTFE membrane as the filter medium. This material has a maximal chemical and pH resistance and optically clear when wet with water. Hydrophilic PTFE syringe filter is a versatile filter for aqueous and aggressive organic solvent-based solutions and especially
