Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
6772-1302 - Syringe Filter, Puradisc, H-PTFE, 13 mm, 0.2 µm Choice of 13 mm or 25 mm syringe filter diameter to suit sample volume. Choice of 0.2 μm or 0.45 μm pore sizes for reta
Products name 10-20mL 18mm Screw Thread Headspace ND18 Dimension 18mm Cap Color Silver Septa details White, Red, Blue, 1.3-1.6mm thickness. Material Aluminum for
25. 100. Forefil™ Syringe Filter: 17 and 33mm Syringe Filters designed with a layer of GF prefilter ideal for filtering the solutions with a high load of particulate matter and to speed up and increase sample volume throughput while reducing thumb pressure. Package: 100pcs/pk (non-sterile), 50pcs/pk (sterile)
Sep 18, 2020 · Syringe filter the vial suspension through a 0.2-μm PTFE membrane into an HPLC autosampler vial. Test the prepared sample for Met, Cys-X, and Tyr (Fig. 2 ) by the HPLC system described above, after calibration with reference standard solutions A–E.
Products name 10-20mL 18mm Screw Thread Headspace ND18 Dimension 18mm Cap Color Silver Septa details White, Red, Blue, 1.3-1.6mm thickness. Material Aluminum for
Products name 10-20mL 18mm Screw Thread Headspace ND18 Dimension 18mm Cap Color Silver Septa details White, Red, Blue, 1.3-1.6mm thickness. Material Aluminum for
standard grade ptfe membrane with high quality-HPLC PTFE-coated Glass fabric material is a high-grade glass fabric with a protective coating based on fluoropolymer. This
PTFEシリンジフィルター(疎水性) 有機溶媒や酸・アルカリに対して耐性を有しています。 Non-Progenic、DNA-Free 強力な化学腐食有機溶媒のろ過、強酸溶液・アルカリ溶剤・アルコールのろ過などに適しています。 オートクレーブ滅菌可 ※
Polytetrafluoroethylene (PTFE) syringe filters, characterized by broad chemical compatibility, superb stability and extraordinary inertia, are typically used for: (1) Filtration
2021年10月29日 · Syringe Filter 0.2 at Thomas Scientific. EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene.
Filled PTFE grades have specific properties improvement based on filler, type of filler & percentage of filler. Less Creep. Better thermal / electrical conductivity. Better thermal / electrical conductivity. Improved frictional properties. Better thermal / electrical conductivity. Very low cold flow. Good thermal / electrical conductivity.
High quality and cost effective, these Polytetrafluoroethylene (PTFE) syringe filters are HPLC certified and available in both a hydrophilic and hydrophobic version. PTFE Laminated Membrane Filters, 0.45 Micron, 47mm, 100/Pk. PTFE
Syringe filters are single use, self contained, filtration devices that are typically used to remove contaminating particulate from liquids or gasses. When selecting the correct syringe filter for an application there are a number of factors to consider, these include: Filter and housing materials. Pore size. Effective filtration area.
Sterlitech non-sterile PTFE syringe filters stand up to the most aggressive solvent, acid and base samples. Female Luer Lok inlet, male slip outlet (50mm is hose barb). PTFE syringe filter product numbers starting with "PTH" are
The PSF syringe filter has larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2. This gives the PSF syringe filter a much improved throughput and flow rate. PTFE PSF syringe filters are available with a multi-layered glass fiber prefilter (GxF) above the PTFE membrane.