Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
The 25 mm device, Acrodisc One™ syringe filter with wwPTFE membrane, sets the standard for HPLC/UHPLC analytical filtration. It can extend the life of a HPLC column by up to 52 times over unfiltered samples. Effects of filters on HPLC column life following injections of unfiltered and filtered 0.05% latex sphere suspensions.
2020年2月17日 · Step 2: Attach a syringe filter to the Syringe. Open the syringe filter package so that you can later pick the filter up easily, especially for individually packed sterile syringe filters. a. For sample volume < 10 mL. Draw a small amount of air (about 1 mL) into the syringe before loading the sample solution.
Polytetrafluoroethylene (PTFE) syringe filters, characterized by broad chemical compatibility, superb stability and extraordinary inertia, are typically used for: (1) Filtration of organic solvent with strong chemical causticity; (2) strong acid solvent filtration; (3) alkaline solvent filtration.
iPure Syringe Filter, PTFE Membrane, 13mm, 0.22µm, 100-pk Product Size Pack of 100 F2700-17 OK Subscribe to our newsletter Email Address Ibis Scientific 7330 Smoke Ranch Road Las Vegas, NV 89128 Call us at 855
Millex Syringe Filter Unit, PTFE, Hydrophilic, Non-sterile Compare Product No. Pore Size Diameter Sterility Material SLLGX13 0.20 μm pore size non-sterile PTFE membrane
Target2 PTFE Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Target 2 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 17 mm, 100 Pk.
SF30-HLP45N. ChromTech HLP, 1.0㎛, 25mm, Natural, 100/pk. SF25-HLP10N. Naturally hydrophilic membrane, Wide range of chemical compatibility to organic solvents. Low no-specific asorbing membrane for maximum protein recovery in critical analysis. Suited for biological sample filtration.
0.22 micro ptfe mushroom syringe filter gas exchange-HPLC Nov 16, 2021 · Sep 28, 2021 · Shroom Supply Syringe Filter - 0.22 μm - PTFE Sizes: 13 mm & 25 mm - Available in both 13mm HOME 1-4mL Autosampler Vials for
Products name 10-20mL 18mm Screw Thread Headspace ND18 Dimension 18mm Cap Color Silver Septa details White, Red, Blue, 1.3-1.6mm thickness. Material Aluminum for Cap, PTFE/Silicone for Septa Package 100pcs/Pack
SLCR013 0.45 μm pore size non-sterile PTFE membrane (hydrophilic) high-density polyethylene high-density polyethylene housing Replaced by SLCRX13NL, 0.45 µm pore
MS ® PTFE syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the
Ptfe Syringe Filter 25mm X 0.45um, For Laboratory 1,300/Pack of 100 Nos Get Quote Ptfe Syringe Filter 25 Mm X 0.22um, For Laboratory ₹ 1,300/ Pack of 100 Nos
PES+0.2+syringe+filter | Sigma-Aldrich Find PES+0.2+syringe+filter and related products for scientific research at MilliporeSigma Product Number Product Description SDS SLHP033N 0.45 µm pore size, 33 mm diameter, Millex-GP PES Millipore Express ® membrane, hydrophilic Pricing SLHPX13 0.45
Manufacturer: Sigma Aldrich Fine Chemicals Biosciences Z5023161PAK. This narrow ring seal is an alternative to a PTFE joint sleeve. Greaseless protection for air- and moisture- sensitive compounds. Can be used for prolonged
Hide. SLCR013. 0.45 μm pore size. non-sterile. PTFE membrane (hydrophilic) high-density polyethylene. high-density polyethylene housing. Replaced by SLCRX13NL, 0.45 µm