Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
Overview of Non-Sterile IC Millex® Syringe Filters: • Ion chromatography certified. • Hydrophilic PTFE membrane available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs. • Low level of IC extractables, optimizing background levels in sensitive IC analyses. • Compatible with both aqueous and organic
Overview of Non-Sterile IC Millex® Syringe Filters: • Ion chromatography certified. • Hydrophilic PTFE membrane available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs. • Low level of IC extractables, optimizing background levels in sensitive IC analyses. • Compatible with both aqueous and organic
These filters are great for using with rubber tubing to create mouth pipets. Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Specifications: Mfr. No. SLFGX13NL. Millex-FG Filter, 0.20 µm, Fluoropore (PTFE) 13mm, Non-Sterile ( 100 / PK) Mfr. No. SLFGX13NK.
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS ITEM WILL Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE
MILLEX ® -LCR Syringe Filter, 0.45 μm Hydrophilic PTFE, 33 mm, Nonsterile SLFG050 Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm, A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. SLGPM33RS
All units contain PTFE filter membranes in plastic housings with Luer lock inlet and Luer slip outlet fittings. Units smaller than 25 mm diameter are specifically designed to minimize hold-up in filtration of small volumes. The 3-4 mm units are recommended for volumes of <1 mL; the 13 mm units are recommended for volumes of 0.5-10 mL.
Syringe filters Millex® Hydrophilic polytetrafluoroethylene (PTFE), 0 Syringe filters Millex® Hydrophilic polytetrafluoroethylene (PTFE) ; Dead volume, Products name 10-20mL 18mm Screw Thread Headspace ND18
Oct 11, 2021 · Millex ptfe 0.22 micron filter for venting-Voa Vial Supplier. Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm | SLFG025LS. The 50 mm Millex® filter units are especially useful for vacuum line protection. All units are bi-directional. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized.
A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. 33 mm Millex filter units provide greater throughput than the 25 mm units Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than. Related Products: Pvdf Hydrophilic Membrane.
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE. • Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS. • Filtration of protein-containing solutions, and aqueous or organic solutions. • Available in 0.20 µm and 0.45 µm pore sizes and three diameters to suit your application
Catalogue Number. SLFG02550. Trade Name. Millex ®. Description. Millex Syringe Filter, Fluoropore™ PTFE, Hydrophobic, Non-sterile. Background Information. Millex® syringe filter units with hydrophobic Fluoropore™ or Millipore Express® PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and
MilliporeSigma Millex Syringe Filter, Hydrophilic PTFE, HPF HPF Millex includes two different media: a graduated glass fiber prefilter (10.0 to 0.7 µm) to remove larger particles and an 0.20 or 0.
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile 0.20 µm pore size, 25 mm diameter, Millex-FG hydrophobic PTFE membrane, for gas filtration and venting applications; find Millipore-SLFG02550 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile 0.20 µm pore size, 13 mm diameter, Millex-FG hydrophobic PTFE membrane; find Millipore-SLFGX13 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich