Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
Polypropylene housing. Diameters: 25 and 50mm diameters handle volumes ranging from 0.5 to 100mL. 50mm diameter PTFE syringe filter is ideal for protecting vacuum lines and pumps. PTFE resin (PTFE): For working with gases or aggressive organic solvents. 0.2μm filter for very fine particulate removal and 0.45μm pore size for most clarification
Minisart® NY25 Syringe Filter 17846-----Q, 0.45 µm Polyamide Minisart® NY25 Syringe Filter 17846-----Q, 0.45 µm Polyamide (Nylon) Minisart ® NY with hydrophilic polyamid
Minisart ® PP Syringe Filters offer essential elimination of particles from the sample prior to HPLC | UHPLC | ICP-MS or other chromatographic analysis, in addition to chemically robust polypropylene housing with inert, PTFE, RC, or Nylon membrane options. Wide range of filter areas; 0.07 cm 2, 1.7 cm2 and 4.8 cm 2; Maximum chemical resistance
33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene housing with a female
Minisart Syringe Filters for HPLC Sample Preparation. Minisart® Syringe Filters for HPLC Sample Preparation Sartorius Minisart ® with a Polypropylene (PP) Housing are Available in a Choice of Membranes: Hydrophilic Regenerated Cellulose (RC), Nylon (PA) or Hydrophobic PTFE Sartorius Minisart ® filters reliably remove particles from your samples without adding unwanted extractables or
Minisart® syringe filters optimized for sample preparation consist of a polypropylene (PP) housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 ml to 100 ml these filters are available in three different diameters with
Oct 29, 2021 · Syringe Filter, PTFE, 30mm diameter, 0.22um, 100/pk (Scientific Strategies # FPT250020-100PK) Polytetrafluorethylene is used for the filtration of aggressive chemicals, including acids and non-aqueous solvents, as well as for GC and HPLC sample preparation. 25mm Diameter. Polypropylene Housing. 0.2 micron filtration membrane.
0.45 Ptfe Filter at Thomas Scientific0.45 Ptfe Filter found in: Syringe Filter, PTFE, 0.45µm, 30mm Diameter, Filter Membrane PTFE 0.45um, Syringe Filter, PTFE, 0
sition. For optimal results Minisart® filters made of MBS housing provide high flow rates and lowest adsorption characteristics. The MBS housing is color-coded for an easy pore size identification. Medical Use and Sterile Venting Special Applications Minisart® syringe filters are available in a broad range of pore sizes.
PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes
Minisart® Standard syringe filters optimized for sample preparation consist of a polypropylene housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 to 100 ml, these filters are available in three different diameters
Description:The Minisart®-SRP syringe filter units consist of a polypropylene reinforced PTFE membrane with a polypropylene housing and are ideal for the rapid and reliable ultracleaning of small volume samples for HPLC or GC for solvents such as acetone, demethylformamide, and DMSO as well as aggressive aqueous liquids.
Filters Minisart® Syringe 0.2um 25mm N/S PTFE pk 50 - Trafalgar Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration.
Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2 0.1µm to 5µm pore sizes Low adsorption characteristics Shop Minisart ® NML Syringe Filters
Description. Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning.