Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
Polypropylene housing. Diameters: 25 and 50mm diameters handle volumes ranging from 0.5 to 100mL. 50mm diameter PTFE syringe filter is ideal for protecting vacuum lines and pumps. PTFE resin (PTFE): For working with gases or aggressive organic solvents. 0.2μm filter for very fine particulate removal and 0.45μm pore size for most clarification
Dec 21, 2021 · Common use 13mm PTFE membrane filter on stock MF-Millipore™ Membrane Filters - Filter Discs and Standard MF-Millipore Membranes, white, plain · Catalogue No.Clear Sorting & Filtering Show Filter Hide Filter Catalog Number Pore Size Filter Diameter ( ) Pack Size VSWP01300 0.025 µm 13 mm Hydrophilic, 0.025 µm, 13 mm, white, plain, 100
CellTreat Syringe Filter PTFE 13mm Diameter, .45um Membrane with Polypropylene Housing, Bulk-Packed, RNase and DNase Free, Non-Sterile, 100/CS CT229779 Now: $149.00 $129.00. Send Inquiry.
General description These Corning syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance These naturally hydrophobic membranes can be used for venting applications or filtering gases 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic
Home » News » 0.45um PTFE Filter » polypropylene housing 0.45um syringe filter Millipore Product Category 1-4mL Autosampler Vials for HPLC, UPLC, GC
MilliporeSigma™ Millex™ Syringe Filter, Fluoropore™ PTFE, Hydrophobic, 0.2 μm For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines Manufacturer: MilliporeSigma™ SLFG025NK
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile Replaces SLCR025NK, 0.45 µm pore size, 33 mm diameter, Millex-LCR hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.
The specifications of 32mm RephiQuik PTFE syringe filters are as follows: Diameters: 32 mm. Catalog No.: RJF3222NH, RJF3245NH. Effective Filtration Area 4.4 cm². Length, Inlet to outlet 26 mm. Housing material Polypropylene (PP) Inlet Fittings Female Luer-Lok. Outlet Fittings Male Luer slip. Process Volume 10 – 100 mL.
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile Replaced by SLCRX13TL, 0.45 µm pore size, 13 mm diameter, Millex-LCR hydrophilic PTFE membrane, tube outlet - Find MSDS or SDS, a COA, data sheets and more information.
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
All units contain PTFE filter membranes in plastic housings with Luer lock inlet and Luer slip outlet fittings. Units smaller than 25 mm diameter are specifically designed to minimize hold-up in filtration of small volumes. The 3-4 mm units are recommended for volumes of <1 mL; the 13 mm units are recommended for volumes of 0.5-10 mL.
Overview of Non-Sterile Millex™ Syringe Filters with Hydrophilic PTFE. Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS; Filtration of protein-containing aqueous or organic solutions; Available in 0.20 μm and 0.45 μm pore sizes and three diameters to suit your application needs
Find syringe filter housing and related products for scientific research at MilliporeSigma (Anopore) polypropylene housing: Expand. Hide. ... Millex Syringe ...
PTFE membrane polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 0.1 mL hydrophobic manufacturer/tradename Millex® parameter 100 mL process volume 45 °C max. temp. 5.2 bar max. inlet pressure (75 psi) technique (s) analytical sample preparation: suitable H 25 mm diam. 2.5 cm Description
33 mm filters have polypropylene housings with a male Luer slip outlet. Pore Size Process Hold-up Volume Outlet (µm) Type Volume (after air purge) Connection Qty/Pk Catalogue No. 25 mm Diameter Millipore LCR (Hydrophilic PTFE) Membrane 0.20 LCR 100 mL <100 µL Male Luer slip 50 SLLGH25NS 250 SLLGH25NB 1000 SLLGH25NK