Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
Millex® in-line filter units feature a Fluoropore hydrophobic PTFE membrane filter which is ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic
Whatman 7582-004, PTFE Membrane, WTP Range, 0.2. PTFE Membrane Filters, 0.22 um, 47mm, Nonsterile, 100 per pack, SF13856 Regular Price: $94.56 Price $75.52 Description Whatman PTFE membranes are chemically stable and inert. They are suitable for strong acids, and alkalis. PTFE membranes are. Send Inquiry.
SLFG025LS. Trade Name. Millex ®. Description. Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm. Background Information. Millex® syringe filter units with hydrophobic
Millex -FG Syringe Filter, 0.20μm, Hydrophobic PTFE provides broad chemical compatibility and is ideal for filtering samples in organic solvents or to prevent back-streaming of atmospheric moisture in venting applications.
Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore™ (PTFE) Membrane: • Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications. • Broad chemical compatibility and excellent solvent resistance with organic solutions.
Merck Millex Syringe Filter, Hydrophilic PTFE, 0.45 μm For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines £289.00 - £2145.00
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile Replaced by SLCRX13NL, 0.45 µm pore size, 13 mm diameter, Millex-LCR hydrophilic PTFE membrane, non-sterile - Find MSDS or SDS, a COA, data sheets and more information.
Millex 0.2 um ptfe filter with high quality - voa vialThe 50 mm Millex® filter units are especially useful for vacuum line protection. All units are bi-directional. A 25 mm diamet
2023年1月1日 · When using a syringe filter, always make sure that the filter is in place before you start drawing the sample. This will prevent any sample from getting lost in the filter. In addition, be sure to check the syringe filter regularly to make sure that it is not blocked. If it is, then you will need to replace it.
Several filter geometries are available to perform sterile filtration. These consist of flat membranes in a stainless steel press (<0.293 m), pleated membranes housed in stainless steel cartridges, and stacked plates in the form of flat seg-ments of membrane filters .
Syringe Filters|For the ready-to-use filter units only virgin raw material is used. This ensures that there is no interaction with the sample COA Certificates of Analysis SDS Safety Data Sheets 语言: 中文(中华人民 共和国) 登录
Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters. Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives. Their unsurpassed quality and consistency of results has led
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, 0.20 um pore Overview of Non-Sterile Millex Syringe Filters with Hydrophilic PTFE PTFE Syringe Filters, hydrophobic,