Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
GL Chromatodisc Syringe Filter for Hydrophobic Samples. PTFE filters provide excellent resistance to solvents and chemicals, which makes them suitable for sample preparation for trace analysis of organic solvents, strong acids, strong alkalis, etc. This is
2022/04/21 · A PTFE syringe filter is an ideal choice for filtering and de-gassing chromatography solvents. With proper pre-wetting (commonly used alcohol), aqueous
2022/12/01 · Mainly made of PTFE material, Filson 13mm PTFE syringe filter is hydrophobic to be best suitable for venting, air and gas filtration. With fine pore size down to 0.2 micron, our 13mm PTFE syringe filter can effectively remove most microorganism, bacteria, virus and other particles. Pore Size: 0.2 – 5.0 micron (typically 0.2, 0.22 and
This section lists the type of syringe filter membrane materials that have limited to no use with organic solvents. Each category is followed by the organic solvent, which includes
MS ® hydrophilic PTFE syringe filters are using special hydrophilic PTFE membrane as the filter medium. This material has a maximal chemical and pH resistance and optically clear when wet with water. Hydrophilic PTFE syringe filter is a versatile filter for aqueous and aggressive organic solvent-based solutions and especially ideal for HPLC
Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.
Your Preferred 4mm PTFE Syringe Filter Manufacturer in China Filson has the ability to fabricate 4mm PTFE syringe filter into 0.22, 0.45, 0.5 micron or other micron rating in
13mm Hydrophobic PTFE Filter 0.45 µm 100pcs/Pack (Non-Sterile) $ 53.00 30mm Hydrophobic PTFE Filter 0.2 µm 100pcs/Pack (Non-Sterile) $ 75.00 30mm Hydrophobic PTFE Filter 0.45 µm 100pcs/Pack (Non-Sterile) $ 75.00
PTFE Hydrophobic Syringe Filters. Features: Highly hydrophobic. Excellent chemical compatibility. Very low extractables. Superior flow performance compared to other hydrophobic membranes. Applications: Clarification of nonaqueous lab reagents, solvents and samples. Filtration of nonaqueous chromatography samples and mobile phases.
Uniform Pore Size – PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency. 13mm disc diameter, 0.22μm, pore size, 100 pcs barreled packed. High-Quality – ISO 9001 certificated, ensuring the
SLFG033NB: 250 per pack. SLFG033NK: 1000 per pack. Applications: Filtration of Organic Solutions, Vent Filtration, Sterilization of Gases. Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore™ (PTFE) Membrane: • Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of
Simsii offers the best quality hydrophobic PTFE syringe filter that can be ideally used for filtration of HPLC solvents. We have these filters in different diameter including 13 mm, 25 mm, and 30 mm. They are preferred for effective filtration of chemicals or hot air. Our range of PTFE syringe filters is high chemical and temperature resistant.
PTFE (Hydrophobic) Syringe Filters Specifications: Retention Efficiency: 0.2 µm —LRV > 7 for Brevundimonas diminuta, 0.45 µm —LRV > 7 for Serratia marcescens Wettability: Hydrophilic Effective filtration area: 0.1cm² for 4mm, 0.8 cm² for 13mm & 3.9 cm² for 25mm Hold up volume: 10 µl for 4 mm, 20 µl for 13 m