Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
PTFE Syringe and Vent Filters. The PTFE syringe filter is available with or without a glass fiber prefilter. PTFE membranes are hydrophobic and are designed to filter most aggressive solvents whether they are acid or base samples. Our 50 mm PTFE syringe is excellent for venting applications or protecting a vacuum pump from liquid contamination.
Comes in a pack of 50. SLCR033. MILLEX ® -LCR Syringe Filter, 0.45 μm Hydrophilic PTFE, 33 mm, Nonsterile. SLFG050. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm, A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. SLHV033R.
Home » News » 0.22um PTFE Filter » High quality 0.22um syringe filter for healthcare High quality 0.22um syringe filter for healthcare Medical Disposable Sterile Blister
0.45 μm pore size. non-sterile. PTFE membrane (hydrophilic) high-density polyethylene. high-density polyethylene housing. Replaced by SLCRX13NL, 0.45 µm pore size, 13 mm diameter, Millex-LCR hydrophilic PTFE membrane, non-sterile. Expand. Hide. Match Criteria: Product Name, Keyword.
Gilson SupaTop Syringe Filters offer reliable and cost-effective solutions for particles removal and clarification needs. With a body made of pigment-free polypropylene, the syringe filters are certified for low levels of UV-absorbing extractables. A large variety of membranes are available for all applications: MCE, Nylon, PTFE, PES or PVDF.
Besides, our PTFE syringe filter has a simple construction, and it is easy for you to install, operate and replace. Fislon 25mm PTFE syringe filter is non-sterile, and you can autoclave it at 121℃ for 30 minutes.
2022/12/11 · To get started, rinse your syringe thoroughly, place it in a pot with water, and bring to a boil. Set a timer for 20 minutes after the food has boiled. After the 20 minutes have passed, take the sterilized syringe out of the pot and place it directly into a sterile container with sterilized tongs or spoons.
Hydrophilic PTFE Syringe Filters – Hawach Hawach PTFE filter clean small volumes for HPLC or GC applications. Pore size: 0.22/0.45 um. Enter to get the best offer. Products
Products name 10-20mL 18mm Screw Thread Headspace ND18 Dimension 18mm Cap Color Silver Septa details White, Red, Blue, 1.3-1.6mm thickness. Material Aluminum for
Syringe filter is a cost-effective way to improve the quality of HPLC analysis,improve consistency,extend column life and reduce maintenance.By removing particulates before
Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases
Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice PTFE Hydrophilic Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice PTFE Hydrophilic Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice PTFE Hydrophilic Syringe Filters 0.2 µm, 13 mm, 100 Pk. Choice PTFE Hydrophilic Syringe
Target2 PTFE Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Target 2 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 4 mm, 100 Pk.
Technical Specifications: Typical physical characteristics: 13mm diameter barrel 25mm diameter barrel Surface area (cm²) 0.65 3.90 Sample volume (ml) <15 <105 Maximum pressure (bar) 45 90 Hold up volume (µl) 8.5 28.5
syringe filters combine premium quality and economy. PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack