Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
Thermo Scientific Nalgene. Filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC with the Thermo Scientific™ Nalgene™ 50mm Inline Syringe Filter with PTFE membrane. Also for sterile filtration of air and gases. Provides an excellent barrier for sterile venting of.
PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. 9mm Short Thread Caps with Septa Screw Caps with Septa for 8-425 Screw Neck Vial 10-425 Screw Caps with Septa 11mm Crimp Top Caps with Septa
high performance 0.2 um PTFE syringe filter for solvent High quality ptfe membrane filter 0.2um for sterilization Wholesales 0.2 um syringe filter for sterilization-Voa Vial 50
MILLEX® Sterile Syringe Filters Hydrophobic PTFE Membranes offers high-performance GD/X syringe filters with a multi-layer glass fiber prefilter for from solution: The 0.22 μm membrane is the filter of choice for sterile filtration of
Syringe filters are available in a range of sizes with different effective filtration areas (EFA). EFA is the filter area that is available for filtration. For a given membrane, the larger the filter area, the higher the flow rate and greater the throughput. Throughput is the amount of fluid able to pass through a filter prior to plugging.
High quality ptfe membrane filter 0.2um for sterilization Wholesales 0.2 um syringe filter for sterilization-Voa Vial 50 mm diameter non-sterile syringe filter with a 0.2 µm pore +8618057059123 Email: market@aijirenvial.com
Performance - High flow rates and low absorption membranes for minimal sample Syringe Filter, PTFE Hydrophilic Membrane, 0.22μm Porosity, 13mm Diameter, Chat Now Hydrophilic PTFE Syringe Filters, 0.22μm 0.45μm - Hawach
2022/12/06 · Difference from glass fiber membrane, the PTFE filter is a kind of membrane material for deep filtration. The membrane filter disc has the following characteristics: membrane filter 0.22 μm is produced from food-grade isotactic polypropylene. No additives in the whole process; stable physical and chemical properties and good compatibility.
Featuring large flux and high strength, suitable for strong acid and alkaline solution filtration, liquid medicine terminal sterilization filtration, water Buy Cole-Parmer Syringe Filter, 25 mm, 0.22 um Hydrophobic PTFE; 100/Pk and more
PDF [ 6 Page / 947KB ] - Membrane SolutionsMembrane Solutions LLC is a global pioneer in the high-tech filtration, Sterile Hydrophobic PTFE Syringe Filters,
2018/06/16 · AXIVA – PTFE SYRINGE FILTERS – STERILE. Media – Polytetrafluoro ethylene (Hydrophobic) , Widely chemical compatible. PTFE syringe filter is hydrophobic
株式会社アイシスは、50を超える世界各国の製品を取り扱い、7000アイテム以上の製品ラインナップを提供します。シリンジポンプやスターラー、ホモジナイザー、チューブコネクター(配管部品)、試験紙、採取器などの理化学実験機器・器具を販売いたします。
Pall’s sterile syringe filters are available with a variety of high-performance membranes to suit application requirements: Fluorodyne® II Membrane - For high flow rates and low protein binding. Not recommended for use with some ethers. Nylon Membrane - Used in our DMSO-Safe Acrodisc syringe filter.
Ahlstrom-Munksjö offers a variety of high performing syringe microfilters for sample preparation and particle removal. ReliaMAX Syringe Filters
kualitas tinggi PTFE 0.22um Membrane Filter Cartridge Compressed Air Sterilization dari Cina, sterilisasi udara Membran Filter Cartridge Produk, dengan kontrol kualitas yang