Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
Dimension | 18mm |
Cap Color | Silver |
Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
Material | Aluminum for Cap, PTFE/Silicone for Septa |
Package | 100pcs/Pack |
Cap type | Open top |
Septa type | Non-slit |
Corning 431227 PTFE Sterile Syringe Filter with Hose Barb Inlet and Outlet, Membrane with 0.2 Micron, Polypropylene Housing, 50mm Diameter (Case of 12):
Sold as sterile in-line filters in a polypropylene housing designed for vacuum systems & venting applications: Nylon: 0.22 0.45: Sold separately, with polypropylene supporting scrim for strength. Polypropylene Fiber Depth Filter: 1.00: Sold separately. Fiber depth filter. Polypropylene (PP) 0.22 0.45: Not sold separately Microbiological
Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Color. Dark Blue. Description. Titan3 PTFE (Hydrophobic) Syringe Filter 1 µm, 30 mm, 100 Pk. Disposable. Yes. Material.
Sartorius Stedim 0.20 µm Midisart 2000 PTFE In-Line Filter & Memory Disc, BB-39237745 Brand: Sartorius Stedim Part #: BB-39237745 Material: PTFE membrane; Polypropylene housing Pore Size: 0.20 µm Diameter: approx. 63 mm (2.48") Length: 68.8 mm (2.71") Includes: Memory Disc to mark the autoclaving cycle & track sterilization procedures ** is biosafe according to the USP Class VI Biological
PTFE resin (PTFE): For working with gases or aggressive organic solvents. 0.2μm filter for very fine particulate removal and 0.45μm pore size for most clarification applications. Certified nonpyrogenic and noncytotoxic. Manufactured in accordance with ISO 9002 and GMP standards. Pore size and membrane type is printed on every syringe filter.
Filter Size Diameter of 25 mm Housing Material Polypropylene Max Pressure 0.29 MPa (42 PSI) Membrane Material Polypropylene Effective Filtration Area(cm^2) 3.5 Max Operating Temperature 80 C (176 F) Dimension 30 mm diameter x 30 mm Height 12 g
Polypropylene housings provide a low cost alternative to PTFE and PVDF housings. Since the housings are constructed entirely out of polypropylene they are suitable for a wide range of applications for both liquids and gases. Each housing is available with two drain options; Manual Twist Drain or No Drain. For liquid filtration we recommend using a version with no drain.
Foxx Life Sciences. 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene housing with a female.
Thermo Scientific Target2 PTFE Syringe Filters PTFE Syringe Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Description: Target 2 PTFE (Hydr
Sterlitech Polypropylene Syringe Filters are used in a wide array of analytical and research applications for the pharmaceutical, environmental, biotechnological, and agricultural industries. The design of these syringe filters allows them to perform filtration on aqueous as well as organic solvent based samples.
PTFE Membrane FiltersAug 4, 2008 Zylon™ Membrane TF (PTFE) Membrane. Filter Media/Support. Unsupported PTFE. PTFE on a polypropylene support. Typical Thickness.PTFE (Polytetrafl
Gore-Tex is a brand of expanded PTFE (ePTFE), a material incorporating a fluoropolymer membrane with micropores. The roof of the Hubert H. Humphrey Metrodome in Minneapolis , US, was one of the largest applications of PTFE coatings. 20 acres (81,000 m 2 ) of the material was used in the creation of the white double-layered PTFE-coated fiberglass dome.
RAISE YOUR SAMPLE FILTRATION STANDARDS - AijirenCertified cleanliness: Aijiren Captiva Premium syringe filters are Housing. Part No. PTFE. 4. 0.2. LC. Polypropylene 5190-5082.Em
Available in sizes and membrane types to meet any application need, Thermo Scientific™ Titan3™ PTFE Hydrophilic Syringe Filters provide cleaner sample extracts by removing interfering materials and fine particles. These filters are used for filtration of aggressive organic, highly basic or hot solutions, without the need to pre-wet the
Feb 17, 2020 · Step 4: Filter the Solution. Hold the assembled syringe and filter it upright. Filter the solution into the receiving bottle by slowly pressing down the syringe plunger to push the sample through the filter. Note: Avoid pressing excessively as this could cause the filter housing to burst.