| Products name | 10-20mL 18mm Screw Thread Headspace ND18 |
| Dimension | 18mm |
| Cap Color | Silver |
| Septa details | White, Red, Blue, 1.3-1.6mm thickness. |
| Material | Aluminum for Cap, PTFE/Silicone for Septa |
| Package | 100pcs/Pack |
| Cap type | Open top |
| Septa type | Non-slit |
Syringe filters are single use, self contained, filtration devices that are typically used to remove contaminating particulate from liquids or gasses. When selecting the correct syringe filter for an application there are a number of factors to consider, these include: Filter and housing materials. Pore size. Effective filtration area.
Sartorius Minisart™ High Flow (HF) Syringe Filters are complete, ready-to-connect units with a high-flow PES membrane. These 28mm filters are available in sterile and non-sterile options, with a 0.2 or 0.45μm pore size. Fast and reliable sterile filtration. Provides excellent flow rate at low inlet pressures.
Products name 10-20mL 18mm Screw Thread Headspace ND18 Dimension 18mm Cap Color Silver Septa details White, Red, Blue, 1.3-1.6mm thickness. Material Aluminum for
Sartorius Minisart™ High Flow (HF) Syringe Filters. Designed for fast and reliable filtration of small to medium volumes. Sartorius Minisart™ High Flow (HF) Syringe Filters are complete, ready-to-connect units with a high-flow PES membrane. These 28mm filters are available in sterile and non-sterile options, with a 0.2 or 0.45μm pore size.
DORSAN® syringe filters, manufactured with naturally hydrophobic Polytetrafluorethylene membranes (PTFE). This is the type of membrane most widely used in the preparation of samples for HPLC analysis. PTFE is widely used due to its great resistance to the majority of acid, alkaline and solvent products. Chemically and biologically inert, they
2018年6月16日 · AXIVA – PTFE SYRINGE FILTERS – STERILE. Media – Polytetrafluoro ethylene (Hydrophobic) , Widely chemical compatible. PTFE syringe filter is hydrophobic and so is not recommended for the filtration of aqueous solution. For filtering aqueous solution PTFE requires pre-wetting with alcohol to establish flow with reasonable
Yellow Ptfe Syringe Filter, For Laboratory, Pore Size: 0.45 Um 800/Piece Get Quote Green Ptfe Syringe Filter, For Laboratory, Pore Size: 0.22 Um ₹ 800/ Piece
MS ® PTFE syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of
2023年1月4日 · To test for hydrophobicity, you can use the water drop test. In this test, a drop of water is placed on the surface of the material. If the material is hydrophobic, the water will bead up and roll off the surface. If the material is hydrophilic, the water will spread out and wet the surface. A Hydrophobia is defined as the angle between a solid
ザルトリウスのMinisart ® シリンジフィルターは、無菌ろ過、分析用サンプルの調製、媒体添加剤、バッファ、化学試薬、薬剤、さらにはガスの清澄化にも適した最高の選択肢です。. Minisart ® シリンジフィルターは、最大の表面積と最速の流量を誇る革新的
Products name 10-20mL 18mm Screw Thread Headspace ND18 Dimension 18mm Cap Color Silver Septa details White, Red, Blue, 1.3-1.6mm thickness. Material Aluminum for
Catalog number: CH2225-NP. Use Thermo Scientific™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering
Filter Media | Filter Cartridges | BECO MEMBRAN H Air | EatonThe filter cartridges remove contaminants in large volumes in applications such as sterilizing fermenter supply air, t
The pore size of your syringe filter is determined by the size of the particles you need to filter out of your aqueous solution. Syringe filters for aqueous solutions are available in these pore sizes: 0.05 µm, 0.10 µm, 0.22 µm, 0.45 µm, 0.70 µm, 0.80 µm, 1 µm, 3 µm, 5 µm, and 10 µm . As a guide, the finer the pore, the more pressure
