© 2022 Advantec MFS, Inc. Color Swatch Image
Advantec Hydrophobic PTFE Syringe Filter, Non-Sterile Made of high-quality PTFE Polypropylene housing Various filtering cut-off particle sizes in the range : 0.2 and 0.5 µm Diameter:3mm, 13mm and 25mm Units can be purchased pre-sterilized and individually packaged or non-sterile in bulk pack All polypropylene can
These PTFE filters are biologically inert and resistant to chemical attack. Relatively durable and can be folded. Autoclaveable. Operating temperature range: –120 to 260°C. Applications–Use as a prefilter to a membrane or as a final filter. Filter hot acids and strong solvents. Use for filtering samples when contamination from media must
PTFE Membranes PTFE Unlaminated Membrane Filters Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters.
Certified ptfe 0.2 micron filter Advantec-PTFE Membrane FilterMillex-FG, 0.20 µm, hydrophobic PTFE, 50 mm | SLFG05010There are also specialized filter units to protect hemodialysi +8618057059123 Email: market@aijirenvial.com
Hydrophobic PTFE Membranes. PTFE T-type membrane is manufactured in a unique way where polytetrafluorethylene (PTFE) is expanded both uniaxially and biaxially. The resultant Hydrophilic PTFE Membranes. Hydrophilic PTFE H-type membrane is a thin, unsupported porous film which is treated to be hydrophilic.
Filter Cartridges and Capsules with Emflon® II Membrane,Filter Cartridges and Capsules with Emflon® II Membrane 4 1. Overview 1.1 Introduction This report contains validation data applicable to Pall sterilizing filter cartridges and capsules with Emflon II membrane and is designed to assist the filter user in meeting the validation
PTFE Hydrophobic Filters with a laminated polypropylene support can be used to sterilize and clarify strong acids and solvents. Also typically used in gas filtration or venting applications. MORE +. $ 147.00 - $ 256.00USD / Pkg of 50. 8 variations of this product are available. See All Product Options Below.
Advantec Ultrafilters are anisotropic permselective membranes that segregate dissolved solutes at the membranes surface on a basis of molecular weight under applied pressure. Two polymer types cover a range of molecular weight cut-off limits and pH limits. Our P-type Aromatic Polyamide membrane is a hydrophilic membrane usable in a pH range of
Advantec Hydrophilic PTFE membrane filters are ideal for HPLC and other mixtures of aqueous and organic solvents. This non-supported membrane is very thin and optically clear when wet. Thermostable up to 100 °C. PTFE offers maximum chemical and pH resistance to strong acids and alkalis. High flow rates with minimal aqueous extractables (<0.3 wt%).