Learn more about Membrane Filters. We enable science by offering product choice, services, process excellence and our people make it happen.
VWR® Syringe Filters Supplier: VWR, part of Avantor Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration. Ideal for sterile filtration Manufacturing process certified to ISO 9001 Biosafe according to Class VI plastics tests
Hydrophobic PTFE membrane filters behave as an absolute retentive membrane. Thin and highly porous Inert to most agressive solvents, strong acids and bases Unsupported Used to sterilise gases, vent gas from aqueous solutions, or sterilise or clarify aggressive chemicals. Operating temperature range: –120 to 260 °C. Order Now
Syringe filters, Acrodisc®, PTFE membrane | VWR. Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing accurate experimental results. HPLC certified for low level of UV-absorbing extractables.
Syringe filters, analytical filtration | VWR Available with either PP, PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm pore size, with the choice often made on analytical column packing size. If the column packing size is larger than 3 μm then use 0,45 μm, and if 3 μm or smaller then use 0,2 μm.
Ideal for filtration of gas and/or organic solvents. Supported membranes offer increased durability for hostile testing environments or acid-aerosol monitoring. Teflo membrane: PTFE with PMP support ring. Typical aerosol retention: 1 and 2 µm: 99,99%; 3 µm: 99,79%. TF (PTFE) membrane: PTFE on a PP support.
Hydrophobic PTFE membrane filters behave as an absolute retentive membrane. Thin and highly porous Inert to most agressive solvents, strong acids and bases Unsupported Used to sterilise gases, vent gas from aqueous solutions, or sterilise or clarify aggressive chemicals. Operating temperature range: –120 to 260 °C. Order Now
Whatman PTFE membranes from Cytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization and liquid clarification. Polypropylene grid support material for increased strength. Temperature resistant up to 120 °C. Resistant to most aggressive acids, alkalis, and solvents.
Membrane Solution’s advanced PTFE membranes (pore size:0.03-5μm) achieve the perfect combination of high flow rate,high retention and cost-effective. Material characteristics of MS®PTFE membrane include small diffusion flow and more pores in any given area. MS®PTFE membrane for filtration including hydrophobic membrane and hydrophilic
Filter Media Hydrophobic PTFE membrane on a polypropylene support Hold-Up Volume <14 µL Housing Material polypropylene Maximum Operating Pressure (bar) 6.9 bar Maximum Operating Temperature (Metric) 100 °C Quantity 100 pkg Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets
Advantec Hydrophilic PTFE membrane filters are ideal for HPLC and other mixtures of aqueous and organic solvents.Membrane filters serve as effective physical barriers that remove solids, viruses, bacteria, and other unwanted molecules. Specialized types are designed for softening, disinfecting, organic removal processing, and water desalination.
Membrane filters, hydrophilic, PTFE Supplier: Advantec Hydrophilic PTFE membrane filters are ideal for HPLC and other mixtures of aqueous and organic solvents. Chemical and pH resistance Optically clear when wet with water High flow rates with minimal aqueous extractables Not autoclavable Order Now
Hydrophobic PTFE membranes have excellent chemical resistance.Membrane filters serve as effective physical barriers that remove solids, viruses, bacteria, and other unwanted molecules. Specialized types are designed for softening, disinfecting, organic removal processing, and water desalination. The filters can be installed in compact, automated, or modular units. These strainers can be used