PTFE single core cables (-190 C to +260 C) DOWNLOAD DATA SHEET PTFE multicore cables (-190 C to +260 C) DOWNLOAD DATA SHEET Contact Us Call 020 8758 7800 Email Open an account Find out more LAPP range of temperature resistant cables
PTFE single core cables (-190 C to +260 C) DOWNLOAD DATA SHEET PTFE multicore cables (-190 C to +260 C) DOWNLOAD DATA SHEET Contact Us Call 020 8758 7800 Email Open an account Find out more LAPP range of temperature resistant cables
They are available either with an asymmetric 0.22 or 0.45 µm polyethersulfone membrane that provides the fastest flow rates and ensures lowest protein binding as well as low extractables. The 0.22 µm version is ideal for sterile filtration of cell cultures, buffers
2019/9/27 · Micron (µm) = 10-3mm. Nanometre (nm)= 10-3µm. Armstrong (A 0) = 10-4µm. The filtration ranges based on the membrane pore size are classified as: Microfiltration, Ultrafiltration and Nanofiltration, although nanofiltration includes the partial separation of the larger salts with a limit close to reverse osmosis.
based in Gwangmyeong-si, SOUTH KOREA. PHILOS Co. Ltd. manufactures and produces different ranges of high-quality membrane modules, which is based on more than 20 years of experience in membrane and water filtration industry. PHILOS is one of the largest providers of membrane for many
2020/9/15 · PTFE membranes. This new generation of filter sets the standard with an unrivalled combination of efficiency, flow rate and strength. The HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in liquids through ASTM F838-05 in gas through full
A standard range of filter cartridge housings in carbon and stainless steel, with various quick-release closures, accepting from 1 to 440 filter cartridges of 10″ equivalent length, and with connections from 25mm to 250mm. Custom-designed housings for virtually any application can also be supplied.
2020/7/13 · GORE ® PolyVent Standard (M12x1 and M12x1.5) offers reliable venting for volumes up to 5 l, and comes in two colors and two thread sizes for different wall thicknesses. The longer thread (M12x1.5) can be installed with or without counter nut.
Nominal ratings of 0.1 to 10 µm provide outstanding protection for ˜ nal membrane ˜ lters. QMA™— 0.2 to 10 micron absolute rated, high-surface area pleated polypropylene ˜ lter cartridges provide low initial pressure drop, high dirt holding capacity and a long, consistent service life.
Z Tec B grade is fully validated for microbial removal using the latest Polyethersuphone membrane technology. Available in 0.2, 0.45 and 0.65 micron ratings. Every filter is fully integrity testable with one of the highest surface areas for any comparable product.
The PP body with TPE diaphragm fulfils the purity requirements of the pharmaceutical industry as per USP 85 and USP 788. GEMÜ metal diaphragm valves are available in a weir-type version and in a full bore version and, because they are insensitive to particulate media, they
Sartorius Polytetrafluorethylene (PTFE) Membrane Filter s. The main application of this membrane filter types is the air/gas-filtration. They are made purely of PTFE and are therefor permanentely hydrophobic. Unlike other (hydrophilic) filter types, they are not wetted by air humidity. PTFE membran.
Geomembrane – MacLine® is a very low permeability bituminous membrane liner or barrier. It is sheet with thickness ranging between 3.0 and 6.0 mm and width varying between 1 and 4 m, produced by working a molten mix (consisting of bitumen, plastomeric and/or elastomeric polymers and mineral fillers) and featured by extremely small permeability coefficients.