Standard-Grade PTFE Membrane Filter Cartridges 2.7" x 30" (Configurable) The Cary Company’s standard grade 2.7" x 30" filter cartridges with expanded PTFE membrane offer high purity filtration with micron ratings from .1 to .45 micron. These
Standard-Grade PTFE Membrane Filter Cartridges 2.7" x 30" (Configurable) The Cary Company’s standard grade 2.7" x 30" filter cartridges with expanded PTFE membrane offer high purity filtration with micron ratings from .1 to .45 micron. These
2019/5/16 · Porex said it designed the Virtek venting and filter component from its proprietary, medical-grade, 3D-sintered PTFE hydrophobic membrane. The filter, which is made up of particles fused together through heat and pressure, does not require supporting layers (or a scrim), unlike expanded PTFE film.
PTFE Laminated Membrane Filters. These hydrophobic PTFE membrane filters are laminated onto polypropylene netting for improved strength and handling. Due to broad chemical compatibility and excellent water repellency, they are ideal for solvent filtration, phase separations, venting, and air sampling. Read More.
2019/7/16 · Porex has engineered this porous venting/filtering component using its proprietary medical-grade sintered PTFE hydrophobic membrane. The filter, which is made up of particles fused together through heat and pressure, does not require supporting layers (or a scrim), unlike expanded PTFE film.
POREX® Virtek Medical PTFE Reusable Filters are made from medical grade PTFE, is the robust and reusable medical media with dual capabilities: a vent that allows pressure equalization during the sterilization process and a filter bacteria barrier for
Cytoplast Dense PTFE Membrane size reference Cytoplast Dense PTFE Membranes • manufactured using 100% non-resorbable, medical grade PTFE for a biologically inert suture that prevents bacterial wicking into surgical sites • 300 series stainless
Porex Corporation 500 Bohannon Road Fairburn, GA 30213 USA T. +1 770 964 1421 F. +1 770 969 0954 info.porex.amrs@filtrationgroup.com Porex Technologies GmbH Strangenhäuschen 30 52070 Aachen, Germany T. +49 241 910525-0 F. +49 241
Eliminate hot and dark spots–POREX Virtek PTFE reflects light in all directions, causing the light to be spread evenly across a surface and eliminate hot spots. Increase efficiency – With more than 97% average reflectance over the entire light spectrum, our reflective materials capture wasted light and deliver directly to the lighting task.
2019/7/16 · Porex has engineered this porous venting/filtering component using its proprietary medical-grade sintered PTFE hydrophobic membrane. The filter, which is made up of particles fused together through heat and pressure, does not require supporting layers (or a scrim), unlike expanded PTFE film.
POREX Virtek PTFE Protection Vents STOCK PRODUCT OFFERING - ADHESIVE DISCS Available Options and Codes Standard Acrylic Adhesive: -40 to 85 C continuous. Approx. 190 micron thick High Temperature Adhesive (H): -40 to 150 C continuous
Porex Virtek protection vents for wind and solar applications are designed to keep systems running smoothly and effectively in any climate or weather condition. With their sintered structure, the POREX Virtek vents assemble easily and can be handled and welded without the need for cumbersome assembly instructions. Our protection vents for wind and
Fluoropore membrane filters are PTFE (polytetrafluoroethylene) bonded to high-density polyethylene to improve handling. Fluoropore™ membranes are also available without the polyethylene backing. These “unlaminated” membranes are supplied only in the 0.5 µm pore size, 47 mm diameter discs.
Cytoplast Dense PTFE Membrane size reference Cytoplast Dense PTFE Membranes, ordering information • manufactured using 100% non-resorbable, medical grade PTFE for a biologically inert suture that prevents bacterial wicking into surgical sites
