Sartofluor ® is the solution for all applications where sterile air is needed. A single-layer PTFE membrane construction ensures validated sterility, while providing maximum flow rate over a wide range of operating conditions. The optimal performance-to-cost ratio allows benefiting from the lowest cost-of-ownership for air/gas and aggressive
Our LifeASSURE™ PFS Series PTFE Filter Cartridges combine flow-enhancing construction with a liquid‐validated, bacteria retentive, hydrophobic PTFE filter membrane, providing excellent air flow rates using small assemblies. Our filters are used for applications requiring 0.2 micronsterilization of air, gas, solvents and chemicals in life
Reusable, in-line filters with 50 mm hydrophobic PTFE membranes in polypropylene housing.Disposable, multipurpose in-line filters are designed for the purpose of small-volume venting of solvents and for gas filtration. PTFE membrane and polypropylene housing have broad chemical compatibility. In-line filters can be used to help protect against bloodborne pathogens. They are useful for benchtop
Reusable, in-line filters with 50 mm hydrophobic PTFE membranes in polypropylene housing.Disposable, multipurpose in-line filters are designed for the purpose of small-volume venting of solvents and for gas filtration. PTFE membrane and polypropylene housing have broad chemical compatibility. In-line filters can be used to help protect against bloodborne pathogens. They are useful for benchtop
.jpg)
PTFE membranes are used in a variety of healthcare applications such as vents on IV filters and spike vents, protecting equipment and sensors from fluids and contamination. Material characteristics include broad chemical compatibility, excellent particle retention, easy handling and sealing, and compatibility with various sterilizing methods
Tetratex ePTFE Membrane delivers a high particulate capture rate. Exceptional flow rates with low inlet pressure. Dissipates heat in micro-environments. Equalizes pressure. Repels water and oil. Regulates moisture. Chemically inert. Toxicity tested to USP 23, Class VI. High solids holding capacity.
Restek™ Syringe Filters with Luer-Lok™ Inlet. Syringe filters with Luer lock inlet offers leak-tight syringe connection. Manufacturer: Restek™ 26142. View more versions of this product. Catalog No. 06-802-784. $166.60 / Pack of 100. Qty Check Availability. Add to cart.
Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa.
Pall vent devices contain hydrophobic membranes that prevent the entry of water and aerosols into sensitive equipment, thereby reducing repairs and prolonging the life of the equipment. Vent devices also protect the lab environment from aerosolized pathogens. For the protection of the laboratory environment and prevention of culture contamination Pall offers self-contained, compact vent filter devices for the high efficiency removal of airborne bacteria and particulate under dry or moist
Vent Filters with PTFE Membranes. Sterile and non-sterile vent filters with a PTFE membrane and different connectors for use with venting applications. As with our other PTFE filters, these vent filters can withstand the most chemically aggressive sample solutions. Vent filters function like standard syringe filters, but the built-in connection options make it easier to hook them up as part of a venting separation process.
Product Options. Not sure which Restek product is the best for your analysis? Consult a Technical Specialist. Catalog #. Product Name (all) Polypropylene Membrane Filters (hydrophobic), 47 mm, 0.45 µm Polypropylene Membrane Filters (hydrophobic), 47 mm, 0.22 µm Nylon Membrane Filters, 47 mm, 0.45 µm Nylon Membrane Filters, 47 mm, 0.22 µm.
The most important factors while selecting vent filters are air flow rate and micro-organism/particulate retention. The membrane in the vent filter must provide sufficient flow rate at appropriate differential pressure to accommodate the air flow required. The filter should efficiently retain particles and bacteria.
Oct 13, 2020 · Hydrophobic PES Membranes for Venting & Gas Filters | Sartorius. superior hydrophobicity or oleophobicity. high air flow rates. compatible with gamma irradiation, EtO and autoclaving. reliable retention of particles, aerosols and microorganisms. complies with USP Biological Tests Plastic Class VI for biocompatibility and cytotoxicity. high thermal and mechanical resistance.
Acro 50 Vent Devices 0.2 µm, hose barb (18/pkg) Product ID 4251 Connections Stepped Hose Barb EFA (Effective Filtration Area) 19.6 cm² Media PTFE Pore Size (Removal Rating) 0.2 Quantity 18 pkg Unit of Measure PAC Min Order Qty 1 List Price $ 335.10 Add to Cart Add to Quote VENT, ACRO 50 0.2 UM PTFE 72/PK Product ID 4250 Connections
Acro® 50 Vent Devices with Emflon® II Membrane - Hose barb, no vent, 0.2 µm 100% integrity tested during manufacturing (100/pkg) Product ID A50V002P2NV Unit of Measure 1/PAC Min Order Qty 1 Connections Stepped hose barb EFA (Effective Filtration Area) 20 cm² Media Emflon II (PVDF) Pore Size (Removal Rating) 0.2 Quantity 100 pkg Size (Metric mm)
