ptfe membrane for solvents VWR

VWR International GmbH Graumanngasse 7 1150 Vienna Telephone +43 1 97 002 - 0 Telefax +43 1 97 002 - 600 E-Mail: info.at@vwr.com Internet: www.vwr.com Vienna, May 2018 FN: 189903 w Commercial Court Vienna VAT reg.-number: ATU 48152305

Filters Syringe Filters. Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing accurate experimental results. HPLC certified for low level of UV-absorbing extractables. Hydrophobic PTFE membrane with PP, autoclavable housing.

In-Line Filters. Disposable, multipurpose in-line filters are designed for the purpose of small-volume venting of solvents and for gas filtration. PTFE membrane and polypropylene housing have broad chemical compatibility. In-line filters can be used to help protect against bloodborne pathogens. They are useful for benchtop fermentors, in-line

PTFE hydrophobic membrane filters. For filtration of air, gases, solvents and acids. Sterilisation by autoclaving or ethylene oxide. New Product.

PTFE membrane: These PTFE membranes are designed for filtration of corrosive gases and organic solvents. Excellent chemical resistance. Ultimate compatibility for filtering harsh chemicals.

Membrane filters, PTFE, TE range, Whatman 供应商: Whatman products (Cytiva) 描述: Hydrophobic PTFE membrane filters are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids and alk

More Product Information. Hydrophobic PTFE membrane filters are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids and alkalis. PP support material for improved strength and handling. Can withstand aggressive solvents,

PTFE membrane For HPLC sample preparation. Chemically resistant to organic solvents Low or no extractables prevent erroneous peaks with UV detection Nylon membrane For HPLC sample preparation. Chemically resistant to organic solvents Low or no

other appropriate solvents. PTFE membrane will stop aqueous aerosols in gas streams. Efficiency: To maximize filtration throughput, use the largest pore size filter that will provide the required cleanliness. If the material to be filtered is heavily contaminated

Membrane filters made of microporous PTFE, with 0,2 mm thickness. The support you need to optimize operations Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.

Description: PTFE hydrophobic membrane filters. For filtration of air, gases, solvents and acids. Sterilisation by autoclaving or ethylene oxide. ,512-8516EA,512-8513EA,512-8416EA,SART11807-90-GEA,SART11806-37-NEA,512-8913EA,SART11803-90-GEA. This product is no longer available.

Bestill i dag! telefonnr. 02290 • telefaks 815 00 940 • e-post info@no.vwr.com eller vwr.com • Solvent IFD contains a 0,2 μm polypropylene membrane for organic solvents • Aqueous IFD contains a 0,2 μm nylon membrane for aqueous based mobile phases ...

All-purpose, universal hydrophilic polypropylene membrane with maximum chemical compatibility when filtering both aqueous solutions. and aggressive solvents. Low protein binding of GH Polypro membrane provides high recovery of critical proteinaceous samples. HPLC certi-. fied to assure that the filter will not add artifacts to analysis. Diameter.

Syringe filters, Acrodisc® One PSF, wwPTFE membrane. Acrodisc® One PSF syringe filter's next generation universal membrane is suitable for all sample types with fast flow rates, low protein binding, and low levels of UV-absorbing extractables.

Syringe filters, Acrodisc®, PTFE. Supplier: Pall Laboratory. Description: Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing Sale. ,516-7653EA,514-0473EA,516-7672EA,514-4019EA,514-4003EA,514-0476EA,514-4229EA.