Filter faster. Supor® membrane provides high flow rates. No need to constantly refill upper fluid reservoir. Draws directly from the mixing reservoir. Eliminates the possibility of contamination from transfer steps. Filters directly into the desired container. Match filter
silicone stopper PTFE coating prevents membrane from adhering to ground glass surface Funnels are graduated from 100 to 250 mL in 25 mL increments Prefilter size is 35 mm Approximate filter area is 9.6 cm² Connection to our 1 liter filtration
Whatman 0.2um PTFE PolyVENT 1000 Filter Membrane w/ Barb Fittings. 6713-1075 Brand: Whatman Part Number: 6713-1075 Porosity: 0.2um Tubulation Size: 1/2" Barbed $5 Flat Rate Shipping on All Orders! Use eBay Shopping Cart to combine items from multiple listings.
Contact our expert team for technical and application support of Laboratory Products. California Proposition 65 Warning : Products manufactured with polycarbonate (PC), polyethylene terephthalate (PET), polyethylene terephthalate glycol (PETG) or polystyrene (PS) contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
SAMP2LGNB. This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses. Millipore.
The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Hydrophobic PTFE Membrane Filters / Type 11807
The main application of these membrane filters ist the filtration of air, gases and chemicals. PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types
0.8 µm, Acrodisc® Syringe Filter with PTFE Membrane 50/pkg | Pall Shop. Free ground shipping on Laboratory products for registered Credit Card users. Acrodisc® Syringe Filters with PTFE Membrane - 0.45 µm (50/pkg 200/cs) Share. Product image is a representative example for illustration purposes.
Vacuum pump is library-quiet - the noise level is only ~ 54 dB small, durable, and chemical resistant! The PILOT3000 is nearly maintenance-free because of the PTFE coated surfaces, PTFE membrane, stainless steel valves and oil-free design. APPLICATIONS Vacuum filtration Solid Related Products: Vacuum Pump With Regulator
Polytetrafluorethylen (PTFE) Permanently hydrophobic filter material, very suitable for air and gas filtration. PTFE membranes are extremely resistant to aggressive solvents and acids and can be used to filter particulate from both liquid and gas samples.
This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.
They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation. Hydrophobic PTFE Membrane Filters. The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic.
Hydrophobic PTFE (polytetra-fluorethylene) membranes are permanently hydrophobic. The main application of these membrane filters is the filtration of air, gases or chemicals. Unlike other (hydrophilic) filter types, they are not wetted by air humidity, allowing unhindered passage of air at low differential pressures as well.
