ptfe membrane for glass products Millex

IC Millex Filters (Hydrophilic PTFE) Membrane 0.20 IC Millex-LG 100 mL <100 µL Male Luer slip 50 SLLGC25NS 0.45 IC Millex-LH 100 mL <100 µL Male Luer slip 50 SLLHC25NS Fluoropore (Hydrophobic PTFE) Membrane 0.20 FG 100 mL <100 µL

Millex filter units with hydrophobic Fluoropore membrane are ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. Specialized filter units protect hemodialysis transducers from blood and moisture. 50 mm Millex filter units are Related Products: Vacuum Line Filter

0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane with glass fiber prefilter, domed housing Millipore

MilliporeSigma Millex Samplicity Filters, Hydrophilic PTFE To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.

MilliporeSigma Millex LG Syringe Filter with Hydrophilic LCR PTFE Membrane Designed for sample preparation and low protein binding fine particle removal from solvents, aqueous and organic solutions.

This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing

Features a hydrophilic PTFE membrane. MilliporeSigma™ Millex™-LG Syringe Filter, 0.20μm, Hydrophilic PTFE is used in non-sterile filtration to remove low protein binding fine particles from aqueous and organic solutions. These filters are recommended for filtration prior to instrumentation analysis. Manufacturer: MilliporeSigma™ SLLGH25NB.

PVC, ethylene oxide sterilized, 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 50. Millex ® syringe filter units with hydrophobic Fluoropore ™ membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore ™ membrane can also be used for sterilizing or clarifying organic solutions.

SLCRM25NS Millipore Millex-HPF LCR 过滤器，0.45 µm，PTFE, with glass fiber prefilter，25 mm，非无菌 0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane with glass fiber prefilter, domed housing MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.

2021/3/12 · Diameter (Metric) Membrane 2.5 cm Filtration Area 3.9 cm 2 Height (English) 0.82 in. Includes Two different media, one graduated glass fiber prefilter, one hydrophilic PTFE membrane filter Temperature (English) Operating 113 F Type Millex-HPF/LCR Filter Unit

2021/1/3 · Shop a large selection of Non-Sterile Syringe and Syringeless Filters products and learn more about Merck Millipore Millex FG Syringe Filters with Hydrophobic Merck Millipore Millex™ FG Syringe Filters with Hydrophobic Fluoropore™ PTFE membrane 50 Merck Millipore Millex™ FG Syringe Filters with Hydrophobic Fluoropore™ PTFE membrane | Fisher Scientific

0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane with glass fiber prefilter, domed housing

2021/3/5 · Membrane PTFE Sterility Sterile Diameter (Metric) 25mm Filtration Area (Metric) 3.9cm 2 Inlet Style Female luer-lok Pressure Rating 5.2 (75)bar(psi) Quantity 25/Pk. Type Millex-FG Syringe Filter Unit

Syringe filters Millex ® Hydrophobic polytetrafluoroethylene (PTFE), 0,45 µm, 13 mm, Millex ® -FH

The HPF Millex includes two different media: a graduated glass fiber prefilter (10.0 to 0.7 µm) to remove larger particles and a 0.20 or 0.45 µm membrane filter for fine filtration.