Quantity 1000/Pk. Pore Size 0.2 μm For Use With (Application) This 25 mm syringe filter with a hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 μm pore size used in low protein binding fine particle removal from aqueous & organic solutions. Sterility
MilliporeSigma SLFA05010 Millex® FA Syringe Filter, 1µm PTFE Membrane, 50mm Diameter, Autoclavable (Pack of 10) Home Lab Equipment Animal Science Products Animal Restrainers Drosophila Products Balances & Weighing Scales Balances, Laboratory
Millex-LG for Samplicity G2, 0.20 µm, hydrophilic PTFE, 33 mm, non-sterile. This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions
2021/6/9 · Overmolded polypropylene housing and optimized housing design Shop Merck Millipore 13mm Nonsterile Millex Syringe Filters - Hydrophobic PTFE Membrane at Fishersci.fi Description Hydrophobic PTFE membranes have excellent solvent resistance and are ideal
Protect vacuum sources and tank/bioreactor venting from contamination and moisture damage. Millex Filters: Inlet and Outlet for Latex Tubing are constructed of sturdy polypropylene with hydrophobic PTFE membranes. Available in 0.2, 0.45 and 1.0µm pore sizes.
Millex found in: Millex 33 mm, Durapore PVDF 0.22 µm, Sterile, Millex-HPF LCR Filter, Millex® Syringe Filter Units with PES Membranes, Millex® Syringe.. sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Millex filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5
SLLGH25NB 1000 SLLGH25NK 0.45 LCR 100 mL <100 ìL Male Luer slip 50 SLCR025NS 250 SLCR025NB 1000 SLCR025NK IC Millex Filters (Hydrophilic PTFE) Membrane 0.20 IC Millex-LG 100 mL <100 ìL Male Luer slip 50 SLLGC25NS 0.45 IC
Non-sterile ion chromatography (IC) Millex ® syringe filters with hydrophilic PTFE membrane provide the lowest IC extractable levels and broad chemical compatibility with both aqueous and organic solutions. Syringe filters are available in two pore sizes and two diameters to optimize results. The housing is made from a low-extractable, high
Inline-Filter Millex ® PTFE Technische Informationen Typ Millex ®-FG Porengröße 0,22 µm Material Membran PTFE hydrophob Ø Membran 50 mm Material Gehäuse PP Filterfläche 19,6 cm² Betriebsdruck max. 4 bar Einsatztemperatur max. 121 C Designed for
SLFH025NB | Millex-FH Filter, 0.45 µm, hydrophobic PTFE, 25 mm, non-sterile This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. Comes in a pack of 250. of
Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters. Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.
Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability. Cytiva Whatman™ Anotop™ 10mm Syringe Filters.
This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines Hydrophobic
