PTFE membrane filter with high quality Millex

Available in Standard and Automation Compatible Packs. HPF Millex filters are available in boxes for individual sample filtration and in tubes for use on automated systems, including Zymark BenchMate™, Prelude™, MultiDose® Plus, and TPW™II workstations. The filters feature a pressure-resistant, domed housing and an optimized.

Diameter (Metric) Membrane 2.5 cm For Use With (Application) Clarifying of aqueous and organic solutions with high particulate levels Height (Metric) 2.1 cm Material (Membrane) PTFE Temperature (English) Operating 113 F Volume (Metric) 100 mL Material

2014/9/16 · Sterile devices are provided with a Certificate of Quality. Faster Flow Rate 33 mm Millex filters have 20% more filter surface than 25 mm filters for significantly higher flow rate and throughput. Higher Operating Pressure With a maximum housing pressure of 150 psig (10 bar) solutions can be filter

Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore™ (PTFE) Membrane: • Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications.

Thermo Scientific™ Nalgene™ Rapid-Flow™ Sterile Single Use Vacuum Filter Units. Increase filtration efficiency. PES membranes and exclusive Rapid-Flow design provide fast flow rates and high throughput while defending against cell culture contamination. Pricing and Availability. Sartorius Syringe Filter

Fisherbrand™ Non-sterile PTFE Syringe Filter. Designed for daily routine analysis. Fisherbrand™ Non-sterile PTFE Syringe Filter features a hydrophobic PTFE membrane for filtering HPLC organic solutions. Available in two membrane diameters (13 and 25mm) and two

Ensure quality control in routine microbiological filtering. Sartorius Gridded Sterile Cellulose Nitrate Membrane Filters, 0.2μm are single-packed membranes with black grids for colony counting, particle testing and microscopy. The 0.2μm pore size is BCT validated. Choose from two diameters and packaging quantities.

of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used

Merck Millipore Millex™ Sterile Syringe Filters: Durapore™ PVFD Membrane. Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0µm pore sizes. Pricing and Availability.

Millex Syringe Filter, Hydrophilic PTFE, Non-sterile 25 mm 0.45 µm Hydrophilic, PTFE, 25 mm, IC-certified, 50 Show Pricing & Availability

Bottle Tops and Filter Units Extraction Thimbles Filter Holders and Hardware Filter Paper Filtering Funnels Food and Beverage Testing Glass Fiber Filters and Prefilters Membranes for Filtration Syringe and Syringeless Filters Water Testing and Environmental

This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing

High throughput Thanks to a maximum body pressure of 10 bar, it enables faster filtration of solutions. Different Membrane Options The Millex LCR filter contains Merck Millipore's “special” hydrophilic PTFE membrane and is HPLC-certified for low levels of UV

Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation. A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50.

• Millex-LCR filter contains a Millipore-exclusive hydrophilic PTFE membrane and are HPLC-certified for low levels of UV-absorbing extractables. They provide the cleanest sample for HPLC analysis. • Durapore® (PVDF) filters combine fast flow with