29/4/2021 · Syringe Filter Finder. 3-step tool designed to help you find the appropriate syringe filter to help you successfully remove particulates from your sample matrix. Use the tool today and request a free sample pack! Phenomenex offers a wide range of syringe filters, if you have questions or concerns relating to extractables please let us know.
.jpg)
The nonwoven polypropylene prefilters (with nominally-rated pore sizes) are constructed with 100% polypropylene, and exhibit similarly low extractables and broad chemical compatibility. Although technically hydrophobic, the polypropylene prefilters are easily water wetted at modest differential pressures.The filters can tolerate pH from 1 to 14
3/10/2017 · The SecurityCAP solvent/eluent caps utilize a filter with an integrated one-way valve that protects lab air quality from hazardous vapors and gases that can leave the solvent container. The solvent filter also incorporates a PTFE membrane that captures dust, dirt, and other contaminants in the air and prevents them from entering the solvent/eluent container, protecting the solvents from
Phenomenex developed Verex Filter Vials with diverse color-coded caps for easy identification of the correct membrane and pore size for the various samples that undergo filtration. Five different membrane types (regenerated cellulose, polytetrafluoroethylene, nylon, polyethersulfone, and polyvinylidene fluoride) and two pore sizes (0.2 μm and 0.45 μm) are available for diverse and unique samples.
PTFE is an inherently hydrophobic membrane excellent for filtration of organic-based, highly acidic or basic samples and solvents. Widely used in chromatography, it is especially well suited for the clarification of non-aqueous samples. Although this membrane is hydrophobic, it can be made hydrophilic by wetting the membrane with alcohol and then flushing with deionized water.
Phenomenex products are available worldwide. support@phenomenex.com www.phenomenex.com IL82410812_L Terms and Conditions filter, clogging of the membrane filter is prevented and sample clean up is optimized. Outlet connection is luer lock. 5 5 ...
SPE Column. Solid-phase extraction (SPE) is a technique designed for rapid sample preparation and purification prior to chromatographic analysis. Chrompure SPE products allow you to efficiently and quantitatively extract the analyses you're looking for from any sample type. So you can ensure accurate, reproducible results right from the start.
Nylon filter membranes pore size 0.45 μm, diam. 47 mm, pack of 100; find Sigma-Aldrich-Z290793 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich Nylon filters are naturally hydrophilic and no wetting agents are
3 Phenomenex l WEB: www.phenomenex.com Two Choices for Most Applications For Aqueous and Mixed Organic Solutions Regenerated Cellulose (RC) For 100 % Organic Solutions Polytetrafluoroethylene (PTFE, Teflon®) As an universal hydrophilic membrane
Recommended filter membranes: Nylon 66® is a highly resistant material and can be used with almost all laboratory solvents. Since Nylon 66 is hydrophilic, no prewetting of the filter is required. PTFE (Teflon®)membrane filters are excellent for organic or other
