Minisart® SRP15 Syringe Filter 17573-----K, 0.2 µm hydrophobic PTFE Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample
Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning. Feature a coating-free, hydrophobic PTFE membrane that is chemically inert.
Minisart ® Air and Minisart ® HY contain a hydrophobic PTFE membrane suitable for venting but also for filtration of oily liquids. The special filter Acticosart comes with an additional dome reservoir filled with active carbon. All Minisart ® types with PTFE can be sterilised by EO. Minisart ® NML and HY in addition have the CE mark of
Sterile Filtration For optimal results Minisart® filters made of MBS housing provide a choice of membranes with pore sizes ranging from 0.1 µm to 5 µm for high flow rates and low adsorption characteristics. The effective filtration area of 6.2 cm² for fast filtration is the largest amongst premium syringe filters and the MBS housing
Porous Pvdf Ptfe Micro Filtration Membrane For Ultrafiltration Water Filtration , Find Complete Details about Porous Pvdf Ptfe Micro Filtration Membrane For Ultrafiltration Water Filtration,Micro Filtration Membrane,Porous Pvdf Filter Tube,Water Filtration Membrane from Water Treatment Supplier or Manufacturer-Tianjin Seechee Technology Co., Ltd.
Syringe filter Minisart® NML, SFAC. Hausing MBS. SFCA / CA (Surfactant-free Cellulose Acetate) membrane. For sterile, particle free, ultrapure filtration of small volumes of liquid up to approx. 100 ml. Color coded and printed for easy membrane and pore size identification.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.
Minisart ® SRP syringe filters with a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis, which require an even more chemical resistant unit than Minisart ® RC, e.g. for
PTFE membrane filter for petrochemicals Minisart Minisart AIR - Thomas Scientific Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 1.0 µm, Non-Sterile, Female Luer Lock, Male Luer Lock, Pack Size 500. Minisart ® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 1659A with a pore size of 1 µm can be used as particle and aerosol barrier.
China PTFE Membrane PTFE Filter Bags Micron Filter Socks For Waste Incineration, Find details about China PTFE Filter Bags from PTFE Membrane PTFE Filter Bags Micron Filter Socks For Waste Incineration - Zhejiang Huading Net Industry Co.,Ltd.
4. Simple cleaning. The actual operating pressure loss of a filter material immediately depends on whether it remains or stays on the surface of the filter material after cleaning, and the length of cleaning time (membrane-coated filter material only takes about a few seconds), and it has a very good cleaning effect.
Jan 17, 2022 · Filter Units Ptfe at Thomas Scientific Minisart ® SRP syringe filters with a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis, which require an even more chemical resistant unit than Minisart ® RC, e.g. for
