Dec 21, 2021 · Minisart® Air and HY with hydrophobic PTFE membrane are designed for the sterile filtration and cleaning of air and gases and are optimized for the venting of bags and containers, e.g. fermenters.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.
PTFE membrane filter for petrochemicals Minisart Minisart AIR - Thomas Scientific Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.
Discover PTFE Membrane Dust Collector Filter Bags 160mm x 6000mm ISO9001 from china factories, quality PTFE Membrane Dust Collector Filter Bags 160mm x 6000mm ISO9001 of Zhejiang Huading Net Industry Co.,Ltd from china factories.
China Ryton PTFE Membrane PPS Filter Bags Needle Felt 400gsm - 800gsm, Find details about China PPS Filter Bags from Ryton PTFE Membrane PPS Filter Bags Needle Felt 400gsm - 800gsm - Zhejiang Huading Net Industry Co.,Ltd.
Minisart ptfe membrane filter 0.2um for gassesMinisart® SRP15 Syringe Filter 17558-----K, 0.2 µm Minisart® SRP15 Syringe Filter 17558-----K, 0.2 µm hydrophobic PTFE Minisart ® SRP +8618057059123 Email: market@aijirenvial.com
Sep 27, 2022 · 4. Simple cleaning. The actual operating pressure loss of a filter material immediately depends on whether it remains or stays on the surface of the filter material after cleaning, and the length of cleaning time (membrane-coated filter material only takes about a few seconds), and it has a very good cleaning effect.
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 1.0 µm, Non-Sterile, Female Luer Lock, Male Luer Lock, Pack Size 500. Minisart ® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 1659A with a pore size of 1 µm can be used as particle and aerosol barrier.
PTFE Laminated Membrane Filters, 0.2 Micron, 13mm, 100/Pk. PTFE Laminated Membrane Filters, 0.20 micron, 13 mm, pack of 100. Hydrophobic, durable ePTFE laminated on to a polypropylene later. Ideal for venting, phase seperations, and aerosol sampling.
Materials Polypropylene reinforced PTFE membrane filter. Polypropylene housing Wetting Water penetration pressure, 3.0 bar (300 kPa) for 0.45 µm, 4 bar (400 kPa) for 0.2 µm 11 Minisart®-SRP Syringe Filters with a clean and chemically inert PTFE Membrane Ready-to-use units for simple, rapid and reliable ultracleaning of small
Minisart HY Standard syringe filter with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type S6596 with a pore size of 0.2 µm can be used for sterile filtration of air/gas. It has a male luer lock outlet.
Cross Reference Guide about Syringe Filters, Membrane Filters, Filter Minisart SRP (Hydrophobic PTFE)-17575 8. PTFE Syringe Filter Single Layered Non-Sterile/0. 45µm/ 25mm SFTF25XB SLFH025NS SYTF0602MNXX104 6874-2504 Acrodisc CR PTFE/Part No.-4219 5190-5087 Minisart SRP (Hydrophobic PTFE)-17576 9.
We doesn't provide fiberglass filter cloth ptfe membrane products or service, please contact them directly and verify their companies info carefully. Total 44648 products from fiberglass filter cloth ptfe membrane Manufactures & Suppliers