The final filter is needed to increase the shelf life of the beer and provide clean beer with desire colour and texture. Selection of final filter can be critical and generally a 0.45 micron Membrane filter is used at this stage. Some of PFP Products 5) 0.45 Micron PES
Low protein binding filter membrane is mainly used for sterilization filtration of biological proteins with low protein adsorption, and covers pharmaceutical, water purification, food, and beverage industries. PES membrane filter does not adsorb proteins and extracts and does not pollute the sample. Hydrophilic polyethersulfone has low protein
Membrane Filter Cartridges Wherever and whenever 100% retention ratings for beverage-spoilage micro-organisms are essential: These membrane filters are generally used in the final filtration stage and installed directly upstream of the filling unit. Sartorius Stedim
Polytetrafluoroethylene (PTFE, Teflon) Membrane Information PTFE is an inherently hydrophobic membrane excellent for filtration of organic-based, highly acidic or basic samples and solvents. Widely used in chromatography, it is especially well suited for the clarification of non-aqueous samples.
Fluorofil™ Plus High Flow Sterile Gas Filter with ePTFE Membrane. Fluorofil™ F100 PTFE Membrane Cartridge Filters. Hydrofil™ Nylon 6.6 Membrane Filter. Hydrofil™ Plus Dual Nylon 6.6 Layer Membrane Cartridge Filters. Vinofil™ Double Layer Membrane Filter. Teffil™ and Teffil™ HF Superior PTFE Membrane Filters.
tion with a glass pre-filter (Phenex-GF/NY), this membrane is excellent for the filtration of particle-laden samples, such as foods and beverages, environmental, biofuels, and dissolution samples. For applications that require low protein or non-specific binding
samples. When used in-line preceding a 0.20 μm membrane filter, clogging of the membrane filter is prevented and sample clean up is optimized. Outlet connection is luer lock. aF0-8515-12 5 100/Pk aF0-8515-52 5 500/Pk Above syringe filters are non-sterile
Air Mini filter cartridges 0.2 micron hydrophobic Polytetrafluorethylene PTFE for sterile air gas filtration food and beverage industry PTFE pleated filter cartridge Introduction: The filtration media of Polytetrafluoroethylene cartridge is hydrophobic PTFE membrane.
The nonwoven polypropylene prefilters (with nominally-rated pore sizes) are constructed with 100% polypropylene, and exhibit similarly low extractables and broad chemical compatibility. Although technically hydrophobic, the polypropylene prefilters are easily water wetted at modest differential pressures.The filters can tolerate pH from 1 to 14
samples. When used in-line preceding a 0.20 μm membrane filter, clogging of the membrane filter is prevented and sample clean up is optimized.Outlet connection is luer lock. AF0-8515-12 6 100/Pk AF0-8515-52 6 500/Pk Above syringe filters are non-sterile.
