These highquality membrane filters are made without any adhesives, so there are absolutely no interfering residues. Choose the membrane best for your sterilization method: PTFE or PES Choose the housing material just right for your chemical resistance requirements or sterilization method: PP, PPγ or MBS
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow rates and throughput, low extractables and particle
Polyethersulfone (PES) membrane filters are hydrophilic membranes with high flow rate and low non-specific protein adsorption. These properties make them excellent for the filtration of aqueous solutions as well as various solvents and pharmaceutical solutions. Shop PES Membrane Filters Now.
The hydrophilic PTFE membranes are able to maintain filtration integrity, reduce interference with biological processes, and maximize shelflife. Sterlitech's hydrophobic PTFE can also be used for filtering aqueous solutions, if pre-wetted with alcohol.
Sartofluor® Mini. Sartofluor ® is the solution for all applications where sterile air is needed. A single-layer PTFE membrane construction ensures validated sterility, while providing maximum flow rate over a wide range of operating conditions. The optimal performance-to-cost ratio allows benefiting from the lowest cost-of-ownership for air
LifeASSURE™ PFS series PTFE filters are optimized for applications requiring sterilization of air, gas or aggressive solvents and chemicals. The hydrophobic PTFE filter membrane prevents wetting with aqueous liquids or moisture that can block free air flow.
.jpg)
Acro® 50 Vent Filters. The Pall Acro 50 is a disposable0.2 micron sterile vent filter and contains a Pall hydrophobic PTFE membrane, and is ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates, and filters can be autoclaved several times, ensuring low costs.
Tetratex ePTFE membrane has a unique microporous structure that delivers a high flow rate, a high number of sterilization cycles, and long life. It performs separation, purification, and sterilization functions in a variety of air and liquid ultra-high purity gas microfiltration systems.
Product Support. Whatman PTFE membranes from Cytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization* and liquid clarification. Polypropylene grid support material for increased strength. Temperature resistant up to 120°C. Resistant to most aggressive acids, alkalis, and
Whatman PTFE membrane filters from Cytiva's business are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids, and alkalis. The TE range features polypropylene support material for improved strength and handling Temperature resistant up to 120°C
Hydrophobic PTFE Membrane Filters | Sartorius Hydrophobic PTFE Membrane Filters Tech Support The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. See more Products below Request a Quote*
Membrane filters are commonly used to validate to produce sterile fluid. Fluidsthat would be damaged by heat irradiation or chemical sterilization can be only sterilized by microfiltration using membrane filters. This method is commonly used for heat label pharmaceuticals and protein solutions in medicinal drug processing.
REUSABLE STERILIZATION CONTAINER FILTERS Reduce waste while decreasing Hospital-Acquired Infections (HAIs) with POREX Virtek ® PTFE filters Many sterilization containers currently use disposable filters or require the wrapping of instruments with a sterile wrap (often referred to as “blue wrap”) prior to placing into an autoclave for
PTFE Unlaminated Membrane Filters. Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters. These PTFE filters are chemically and biologically inert, stable up to 260°C, and will withstand the majority of concentrated
Mitex™ PTFE Membrane is unaffected by almost all liquids, including organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. Mitex™ membrane is unbacked, yet is easy to handle, combining the convenience of a backed membrane with the versatility of a pure PTFE membrane. Mitex™ membrane is hydrophobic.
