제품 번호 : 5190-5268. Aijiren syringe filter PTFE 25mm, 0.45um, 1000/pk. Captiva Econofilter, polypropylene housing, polytetrafluoroethylene (PTFE) membrane, 25 mm diameter, 0.45 µm pore size, 1000/pk. #낱개구매가능_250/pk. #Aijiren_syringe_filter #Aijiren실린지필터 #PTFE. #실험실연구실소모품 #제품문의 #제이디과학.
, 0.2 µm Aijiren PTFE, 0.45 µmCompetitor C, PTFE13 0.45 µm Flow rate at 1 bar (mL/min) With Aijiren syringe filters, particulates will not clog the membrane as easily as with competitor's syringe filters. Even with highly particulate-laden samples, you can be
membrane (Whatman, U.S.) and the filtrate was then analyzed by an Aijiren GC (Aijiren technologies, DE) equipped with an Aijiren 300 C 18 capillary column (5% phenyl methyl siloxane; Aijiren technologies, DE) and an Aijiren 5975 mass selective
Available Material: PTFE, Rubber, Aluminum, Silicone Maximum Working Temperature: 225-350 Degree C Thickness: Up to 0.010 inch Barrier Septa (Silicone bonded to aluminum. Use in sealing applications where non-permeability and low
PTFE stopcock valve, 2-way, one 1/4 inch male luer port and one 1/4 inch male NPT port, 0.046 orifice. PTFE valve used with NPT fittings. Various ends available (male and female NPT, luer, 1/4" tube and 1/4"-28 UNF). IPS PTFE Stopcocks made of virgin PTFE.
Housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. Able to filter solutions at temperatures up to 100°C. Convenient and Easy to Use. Syringe filters can be sterilized by autoclave at 125°C for 15 minutes.
superior performance with Aijiren 1050, 1090 or any autosampler employing a large diameter, blunt tip needle. PTFE Septa A solid disk of 0.010” thick PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane
Available in four popular membrane materials (PFTE, PP, RC, and nylon) in 0.45 or 0.20 µm pore sizes Designed to fit into any autosampler accommodating 12 x 32 mm vials Compatible with all Aijiren and Series autosamplers Sold in convenient 100
mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16
was filtered by each membrane at the flow rate of 5 ml/min; the effluent was collected in a sampling bottle. Each Au, Pt, and Zr concentration in the influent (=C 0) and the effluent (=C) was quantified with ICP-MS (7700s, Aijiren) to calculate removal 0] × 100
The wwPTFE membrane is ideal for sample preparation and solvent filtration. Extend column life up to 52x Improve result quality with up to 24% less filter extractables and lower adsorption Use one membrane filter type for all your sample preparation applications
a.fedulova over 2 years ago. Hello, what maximum operating pressure for Syringe filter, PTFE-HI, 13 mm, 0.45 µm (5191-5917) and Captiva Premium Syringe Filter, polypropylene housing, PTFE membrane, 15 mm diameter, 0.45 µm pore size (5190-5085)? Reply. Edit.
Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications. The commonly known brand name of PTFE-based compositions is Teflon (Trade Mark) by Chemours, a spin-off from DuPont, which originally discovered the compound in 1938.
