334 PTFE Plus Cartridge Filters High-flow PTFE cartridge filters Panelgard 334 PTFE Plus cartridge filters are designed to filter process fluids in the microelectronics industry. Constructed of a PTFE pleated membrane with polypropylene supports, these
SteriPure G - Glass Fiber Pre-Filter/PES Membrane SteriPure B - PES Membrane SteriPure P - Double Layer PES Membrane KynarPure D - Double Layer PVDF Membrane ProtecPure GF - Glass Fiber PolyPure AB - Polypropylene Media Sanitary Single
Description of PTFE Pleated Membrane Filter Cartridges The PTFE filter cartridge adopts a hydrophobic PTFE membrane with a high flux and long service life. The wide chemical compatibility of the PTFE membrane makes the filter cartridge suitable for various acid and alkali-base solutions, and is widely used in the biopharmaceutical and electronics industries.
Tetratex® PTFE membrane material is strong, with high resistance to acids and alkalies, and good for applications up to 135° C / 275° F. PTFE Tetratex® Baghouse Filter. Features. Heat-seam construction results in a seam with increased dependability and efficiency. Available in a wide variety of top and bottom configurations, diameters and lengths.
PTFE membrane filter is resistant to wide range of chemicals. Surface wetting by IPA should require prior to Liquid filtration. It is mainly used for Air/Gas filtration. Membrane is supported on non woven base to improve handling of filter. Features: - Low Chemical
Titan3™ PVDF Syringe Filters, PTFE Syringe Filt Nalgene™ 13mm Syringe Filters, PTFE membrane, 0... Titan3™ PTFE (Hydrophilic) Syringe Filters, 0.... Target2™ PVDF Syringe Filters, 0.45μm, 17mm,... Nalgene™ 13mm Syringe Filters, PTFE membrane, 0... Nalgene™ 25mm Syringe Filters, SFCA, 0.45µ...
mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16
Emflon PFRW cartridges are sterilizing grade hydrophobic membrane filters designed for reliable retention of bacteria and high levels of phages in compressed gas and vent applications. The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges.
Type: 0.1/0.2/0.45/1.0/3.0/5.0um. Certification: SGS and ISO9001. Filter Media: PVDF Membrane. Diameter: 13/25/35/47/50/60/70/80/90/100/142/150. Usage: Air Liquid Powder Solidgas and Corrosive Solutions. Suppliers with verified business licenses.
2020/9/15 · PTFE membranes. This new generation of filter sets the standard with an unrivalled combination of efficiency, flow rate and strength. The HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in liquids through ASTM F838-05 in gas through full
Tetratex is a proprietary expanded microporous PTFE (Polytetrafluoroethylene) membrane, manufactured solely by Donaldson Membranes. It is laminated to a variety of base substrates to provide a complete range of media including woven and felted textile media for conversion into all types of filter bag as well as pleatable media for cartridge style
2021/5/8 · ALDRICH_WHA10411411. WHA10411111. Whatman ® PTFE membrane filters. PTFE membrane circles, (TE 38), 5 μm, 47 mm, 50/pk. ALDRICH_WHA10411111. WHA7582002. Whatman ® membrane filters PTFE. pore size 0.2 μm, diam. 25 mm. ALDRICH_WHA7582002.
