polypropylene housing ptfe membrane for glass products

Housing injected in Polypropylene or Acrylic Membrane Material:Cellulose Acetate, Nylon, PES, Nitrocellulose Mixed Esters, Regenerated Cellulose, PVDF, PTFE and PE Membrane Diameter: 13mm and Housing Diameter: 18mm Multifunctional Syringe Filters

Resources. Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives. Female luer-lock inlet and male luer slip outlet. Color coded by membrane type for easy identification, and membrane material and pore size are printed on the housing. Available individually packed in peel-to-open paper/plastic

Fisherbrand™ Non-sterile PTFE Syringe Filter features a hydrophobic PTFE membrane for filtering HPLC organic solutions. Available in two membrane diameters (13 and 25mm) and two (0.2 and 0.45µm) pore sizes. Sartorius Minisart™ Plus Syringe Filters. Includes a glass fiber pre-filter for difficult to filter liquids.

Hydrophobic PTFE membrane is reinforced with polypropylene housing and features a stepped hosebarb. Available in Non-sterile 1.00µm, 0.2µm pore sizes with platinum-cured silicone tubing, or in bulk packs (without tubing). Hydrophobic PTFE membrane

Polydisc AS (Aqueous Solution) For tissue culture media, reagent preparation, particle counting solutions, pharmaceutical preparations High-throughput polyethersulfone membrane (low protein binding and no surfactants) Glass microfiber prefilter extends membrane

Fisherbrand™ Non-sterile PTFE Syringe Filter. Designed for daily routine analysis. Fisherbrand™ Non-sterile PTFE Syringe Filter features a hydrophobic PTFE membrane for filtering HPLC organic solutions. Available in two membrane diameters (13 and 25mm) and two

Finneran 13mm Syringe Filters with glass fiber membranes are available in 1.0um, 2.0um and 5.0um pore sizes. Glass fiber membranes have fast filtration flow, elminate sample contamination and have good chemical compatibility. Finneran syringe filters are autoclavable.

MilliporeSigma. This 25 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in low protein binding clarification of aqueous & organic solutions. MillexR syringe filter consists of a membrane sealed in a high density polyethylene housing .

PM2547050. The PTFE Membrane for PM2.5 Particle Monitoring is a filter disc used in conjunction with PM2.5 Environmental Monitoring equipment., PTFE membrane, hydrophobic, pore size 2.0 μm, white filter, plain filter. Millipore.

0.45μm PTFE syringe filter is mainly used in pre-sample for chromatography. Aijiren is one of the largest chromatography consumables manufactuer, supplied all kind of

This cartridge offers dual layer filtration with its Glass Fiber Pre-Filter protecting the final layer of Polyethersulfone (0.22 um, 0.45 um or 0.65 um). These cartridges have the highest performing glass micro-fibers protecting the PES membrane, extending its filtration efficiency and lifetime.

Polyethylene polypropylene waterproof membrane house packaging wall mat waterproof breathable membrane $0.50-$0.90 / Square Meter 50000 Square Meters (Min. Order)

Capsule filter NON sterile PTFE 0.4 µm surface 0.8 ft2 connectors 0.25 in Male NPT PTFE 0.4 General purpose laboratory filtration; Filtration of Aqueous Solutions; Venting and Gas Filtration 1212992 Capsule filter NON sterile PTFE 0.4 µm surface 5.9 ft2 PTFE

The PolyPure-AB cartridge is an absolute rated, high performance, pleated cartridge made from polypropylene meltblown filter media. It's all polypropylene construction provides excellent compatibility with solvents, acids and bases. Featuring 7.5 ft² of Effective Filtration Area (EFA) per 10" length, these cartridges provide superior flow rates and

PTFE membrane polypropylene housing polypropylene housing pricing ZapCap ® bottle-top filters 3 Product Results glass fiber membrane polypropylene housing pricing WHA10463703 0.2 μm 13 mm non-sterile PTFE membrane polypropylene housing 0.2 ...