protein binding polypropylene syringe filters Unlike many organic membranes, the inorganic Anopore membranes in Anotop syringe filters have sharply defined capillary pore structures with narrow pore-size distribution. The syringe filter’s pigment-free polypropylene housing is made without wetting
The PTFE membrane is bonded to a polypropylene support and is inherently hydrophobic creating a moisture barrier. Key Features Made of high-quality PTFE Polypropylene housing Various filtering cut-off particle sizes in the range : 0.2 and 0.5 µm Units can
Syringe Filter Membrane : Nylon/PTFE/PES/MCE/ PVDF/ CA Syringe Filter Diameter (mm) :13mm & 25mm PTFE Syringe Filter Polypropylene Housing 3.PES Syringe Filter Part No. FS1322 FS1345 FS2522 FM2545 Description Pore Size: 0.22um ...
Gore-Tex is a brand of expanded PTFE (ePTFE), a material incorporating a fluoropolymer membrane with micropores. The roof of the Hubert H. Humphrey Metrodome in Minneapolis , US, was one of the largest applications of PTFE coatings. 20 acres (81,000 m 2 ) of the material was used in the creation of the white double-layered PTFE-coated fiberglass dome.
AcroPak Membrane Filter Capsules have hydrophilic Supor® (polyethersulfone) membrane for low protein binding. 1/4-1/2” stepped hose barb inlet/outlet connections. Polypropylene housing with polycarbonate filling bell. Gamma sterilized. Endotoxin-free and
Technical Parameters of PP Syringe Filter Diameter 13mm 25mm Housing Material Polypropylene Membrane Material PP Pore Size 0.1um, 0.22um, 0.45um, 0.8um, 1.0um Maximum Temperature ≤50 Inlet Connection Female luer lock Female luer lock Outlet
Acro® 37 TF Vent Device With PTFE Membrane. Multi-Purpose Filter for Small-Volume Venting and Gas Filtration. PTFE membrane and polypropylene housing have broad chemical compatibility. Disposable - Eliminates the cost and labor associated with disc
The turbulent flow of the retentate stream prevents the build-up of particles on the inner surface of the membrane tube, providing high flux and prolonged filter life. This method of turbulent cross flow membrane filtration with Porex’s large bore tubular design may eliminate the need for prefiltration and should routinely handle high solids levels up to 5% by weight.
Interstate Specialty Products die cuts PTFE membrane filters for medical and scientific, electronics, and industrial applications. For over 50 years, we’ve been using precision die cutting to create custom PTFE membrane filters at our Made in the USA company in Sutton, Massachusetts.
Prefilter Layer Polypropylene Membrane Filter PTFE Drainage Layer Polypropylene Outercage Polypropylene Inner Core Polypropylene The upstream side of the filter housing is filled with water and the air volume above the water column is measureda test ...
Structural membrane tubes from POREX are the focus of our industry leading tubular membrane modules. Dependable membrane/substrate tubes utilize high flow rate membranes that can be used in new systems or as replacement filters in Memtek® microfiltration systems. The supreme strength of the high flow rate membrane generates a smaller system
Description: PTFE Absolute Rated Membrane Filter Cartridges Polytetrafluoroethylene ( PTFE) membrane filter cartridges constructed in polypropylene hardware for a wide range of industrial applications Absolute retention from 0.1 to 1.0 microns Outstanding hydrophobicity. Assembly / Element Type: Cartridge, Other. Features: FDA Compliant.
cartridge filter housing. 771P - 780PC. Operating pressure: 7 bar. Headline polypropylene housings are available two versions: all polypropylene with matching polypropylene bowl, or with lower cost polycarbonate bowl. Housings Compare this product Remove from comparison tool. cartridge filter housing
