MEMBRANE FILTERS 2 • Strong:Advantec membranes are monitored for both burst (longitudinal) and tensile (lateral) strength. • Chemically and biologically clean:As part of a compre- hensive quality program, only high purity reagents and raw materials are used to
Housing Material Membrane Material Pore Size, µm Diameter, mm Mfg No. Qty/ PK 90-7459-09 Polypropylene Nylon 0.45 30 30NP045AN 100 90-7459-16 Polypropylene PTFE, Hydrophilic 0.20 25 25HP020AN 100 90-7459-19 Acrylic Cellulose Acetate 0.45 25
syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: PTFE-
Hydrophobic PTFE membrane is reinforced with polypropylene housing and features a stepped hosebarb. Available in Non-sterile 1.00µm, 0.2µm pore sizes with platinum-cured silicone tubing, or in bulk packs (without tubing).
Pore size (µm) Membrane Housing Catalog # #/Case 50mm diameter for gases or 0.2 – 5 L fluid volume, Stepped hose barb inlet and outlet 0.2 PTFE Polypropylene DS0222-0020* 10 0.45 PTFE Polypropylene DS0222-0045* 10 * autoclavable
MEMBRANE COMPARISON Hydrophilic Hydrophobic MEMBRANEFILTERS 3 www.ADVANTEC.co.jp The membrane filter nomenclature specifies the required information for correctly ordering membranes. A 020 A 293 C EXAMPLE The nine digit code specifies type, pore size, surface/type, diameter and packaging as illustrated below.
DISMIC-PTFE for IC yringe Filter Units offer a covenient and compact solution for fast filtration and sample preparation prior to instumental analysis. Advantec DISMIC syringe filters are designed to maximize sample recovery. Our pigment-free polypropylene
PTFE Has outstanding chemical resistance, and many other beneficial characteristics such as uniformity, surface capture performance, and non-separation of fibers. *When filtering organic solvents with a cartridge filter, use a stainless steel housing and provide
Non-pigmented acrylic or polypropylene (PP) housings feature integral filter sealing to avoid the risk of contamination from pigments and adhesives Each filter is clearly marked with membrane pore size Housings have standard luer connectors; 50-mm filters feature 7
Polypropylene (PP) housing available with PTFE or PES membrane, or PP depth media All-polypropylene housing is thermally fused and offers broad chemical compatibility; diameter is a standard 78 mm Capsules are sterilizable by autoclave or ethylene oxide (EtO);
28 Disposable syringe filter is available with a PES, CA or hydrophilic PTFE membrane, all come with a polypropylene housing. The CA and PES membranes are suitable for fi ltration of aqueous and alcohols while the PTFE menbrane can also be 30%
Membrane, Venting Ptfe found in: Vented Top VersaCap® 53mm with .2µm PTFE Membrane, Hydrophobic PTFE Membrane Filters, PTFE Membrane Filters, Fluoropore .. in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. during autoclaving.
