Highly solvent resistant. Low no-specific absorbing membrane for maximum protein recovery in critical analysis. HPLC certification which guarantees the filter will not produce extraneous peaks in the UV range. 100% integrity tested with higher burst strength ratings assuring they
Solvent Mixtures NY PTFE-L First Alternative Recommended Membrane 0.22 µm Tissues, Media, Buffers CA MCE 0.45 µm Biological Samples/Proteins PES PVDF-L 0.45 µm Hydrophobic PTFE < 3 µm Column ID Filter Size LC GC PP Hydrophilic NY ≥ 3 µm
Polytetrafluorethylene (PTFE) membranes are naturally and permanently hydrophobic. They are ideal for filtering gases, including humidified air. The extreme chemical resistance of PTFE membranes makes them very useful for filtering solvents or otherunsuitable.
The Memtrex absolute pleated cartridge filter family features a membrane as filtration media. The Memtrex family covers a wide range of applications thanks to multiple hydrophilic and hydrophobic media such as polyethersulfone (PES), nylon 66, polypropylene (PP), polytetrafluoroethylene (PTFE), and polycarbonate track-etched (PCTE).
STERIPleat Vent filters use a hydrophobic PTFE membrane for the removal/reduction of bacteria in tank venting and gas filtration applications. These filters can be used with our STERALine filter housing range to provide a compressed gas or atmospheric venting solution.
PTFE membrane, hydrophobic, resistant to strong acid, strong alkali and high temperature, suitable for the filtration of strong corrosive solution, organic solution and gas. PVDF. PVDF membrane, hydrophobic, low protein binding, suitable for general biological filtration,
The SecurityCAP mobile phase and solvent waste safety caps prevent dangerous vapors and gases from leaving HPLC/UHPLC solvent reservoirs. Over time, these chemicals can have a negative impact on the health of all employees and visitors in the lab. The SecurityCAP also protects HPLC/UHPLC results by preventing airborne particulates and contaminants
Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore™ membranes provide broad chemical
it can filter wide range of impurities, based on the pore size of membrane, it can be used with combination with adsorbents for filtration of certain harmful chemicals that cannot be filtered by membrane filter alone or it is more cost effective to have larger pore membrane with having adsorbents to trap other chemicals,
This item is a Hytec PTFE/Teflon filter housing commonly used for Hot Sulfuric or Hot Phos applications. The filter housing allows for removable filter cartridges. These were commonly used on SCP wet stations. We have three in stock. The units can be
.jpg)
This technology enables us to produce a porous PTFE membrane filter with a double-layer structure. The structure comprises a filter layer, which is 2 μm or less in thickness and has pores of 4-50 nm in diameter, and a support layer, which is 30-100 μm in thickness and has pores of 50 nm or larger in diam- eter.
Membrane Solutions offers full membrane filter for various solvents or liquid or gas, including PES , MCE, Nylon, PVDF , PTFE , PP , CA, Nylon Mesh and PC, the disc diameter is from 13mm to 293mm, which are manufactured in ISO 9001 certified facility. Most membranes can be sterilized if needed.
PVDF Series PTFE Membrane Pleated Filter Cartridge Pleated Filter Cartridges. PFA Series PTFE Membrane Pleated Filter Cartridge Pleated Filter Cartridges. Glass Fiber Pleated Filter Cartridge Pleated Filter Cartridges. Nylon Membrane Pleated Filter Cartridge Pleated Filter Cartridges.
Aggressive chemical compatibility. Inherently hydrophobic. Laminated and unlaminated. Unlaminated membranes are more compatible with strong acids, aggressive solvents and high temperatures. Recommended for: aggressive solvents, strong acids or base filtration; sterilization, clarification; and air and gas venting. pH range: 1-14.
