Minisart® Air and HY with hydrophobic PTFE membrane are designed for the sterile filtration and cleaning of air and gases and are optimized for the venting of bags and containers, e.g. fermenters. Minisart ® Acticosart is designed for the ultracleaning of air and gases and contains active carbon for
Syringe filter Minisart SRP, PTFE With a chemical-resistant, hydrophobic PTFE membrane for high purification of solvents or aggressive liquids in HPLC or GC analysis. Low adsorption. With female luer-lock inlet, male luer slip outlet. Non-sterile. : Filter diam.
Minisart® SRP’s coating-free hydrophobic PTFE membrane is suitable for venting applications and leachable free clarification needed for aggressive liquids. In addition Minisart® PES offers a combination of PES membrane and PP housing and has a higher chemical compatibility than PES in MBS housing.
and our coating-free hydrophobic PTFE membrane used in Minisart ® SRP are exceptionally pure compared with other common filter membranes. Clean & Green Our regenerated cellulose (RC) membrane used in Minisart ® RC, our nylon (polyamide) ® NY ®
Minisart®High Flow with polyethersul- fone (PES) is optimal for highest flow rates and a pH of 1–13. Due to the asymmetric membrane structure, the PES surface almost behaves like a pre-filter. Both Minisart®types NML and High Flow can be sterilized by ethylene oxide (EO) or gamma irradiation and are suitable for glueing and assembly to tubing.
Sartorius Minisart™ SRP4 Syringe Filters. Minisart™ SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17844 with a pore size of 0.2 μm can be used for sample preparation and sterile filtration. It has a male luer slip outlet.
Syringe filter Minisart SRP, PTFE With a chemical-resistant, hydrophobic PTFE membrane for high purification of solvents or aggressive liquids in HPLC or GC analysis. Low adsorption. With female luer-lock inlet, male luer slip outlet. Non-sterile. : Filter diam.
.jpg)
Minisart. Minisart-plus units also contain this glass fibre filter, but as prefilter on an 0.45 µm or 1.2 µm membrane, for higher total throughputs. Specifications for Minisarts, Minisart-plus and Minisart-GF Bubble points Min. values, water wetted, 1.6 bar (0.45 µm
Minisart SRP: Ready-to-use units with a clean and chemically inert Polytetrafluoroethylene (PTFE) membrane for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis. Provide superb chemical resistant for solvents or for aggressive aqueous liquids. Compare this item.
Description:The Minisart®-SRP syringe filter units consist of a polypropylene reinforced PTFE membrane with a polypropylene housing and are ideal for the rapid and reliable ultracleaning of small volume samples for HPLC or GC for solvents such as acetone
* Sterile Minisart ® are individually packaged and have been sterilized by ethylene oxide (EO). Not presterilized Minisart ® can be sterilized by autoclaving at 121 C for 30 min | or by using EO. 1 GF prefilter: Ultrapure glass fiber with 0.7 µm particle retention on
Our coating-free hydrophobic PTFE membrane used in Minisart® SRP is suitable for venting applications as well as the leachable free clarification of very harsh chemicals. In addition Minisart® PES offers a combination of hydrophilic PES membrane and PP housing and has a higher chemical compatibility than PES in MBS housing.
