Our Minisart ® filters with a housing made of acrylic (MBS) are the perfect choice for sterile filtration and clarification of additives, buffers, reagents, drugs and gases. Sterilization by filtration is the fastest solution for bacterial cell removal. Ready-to-use pre-sterilized and single-packed units.
PTFE = Teflon® (Polytetrafluoroethylene)*, PVDF = Polyvinylidene fluoride, PS = Polyether sulphone, CA = cellulose acetate, RC = Regenerated Celluose, PP = Polypropylene, PC = Polycarbonate CA = Celluloseacetate, CN = Cellulosenitrate, PA = Polyamide Nylon®, PET =
2021/1/15 · The membrane was used for phosphate ion removal (100 mg g −1) . In Wang’s work, EDTA was grafted on the bacterial cellulose membrane (BCM) via amidation reaction to remove Sr 2+. The adsorption capacity of the obtained membrane reached 44.86 mg g −1
Hydrophobic PTFE membrane • Increases surface area • Improves flow • Minimizes pressure drop All-PTFE fluoropolymer materials and thermally bonded construction • Ensure excellent chemical compatibility • Minimize chloride and metals extractables that
2019/9/5 · Polytetrafluoroethylene (PTFE) microfiltration membranes (pores size of 0.1 μm, Φ50 mm) were provided by Haining Yibo Filtration Equipment Factory (China). 2.2. Grafting of PVDF with 4-VP. The grafting of 4-VP on PVDF was carried out by UV photo-preactivation/ thermally-induced grafting method.
Sartorius™ Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning.
Minisart ® SRP’s coating-free hydrophobic PTFE membrane is suitable for venting applications and leachable free clarification needed for aggressive liquids. In addition Minisart ® PES offers a combination of PES membrane and PP housing and has a higher chemical compatibility than PES in MBS housing.
Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning.
Metals extractables limit (µg/device) Particles in DIW (≥50 nm/10 mL) PTFE membrane 17 L/min <3.5 <4; Fe and Ca <0.5; Na <1.5; all other individual metals <0.3 <25 UPE membrane 8 L/min ≤30 <30 <50 PTFE membranes of a similar nominal pore This is a
Minisart SRP: Ready-to-use units with a clean and chemically inert Polytetrafluoroethylene (PTFE) membrane for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis. Provide superb chemical resistant for solvents or for aggressive aqueous liquids.
Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet.
Minisart ® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 1659A with a pore size of 1 µm can be used as particle and aerosol barrier. It has a male luer lock outlet.
Minisart® 0.2 μm Syringe Filter Holders for Rapid Small Volume Sterilization with Maximum User Convenience 33 High Flow Rate Minisart® Syringe Filters for Particle Removal, Ultracleaning and Prefiltration 34 Minisart® RC Units with Hydrophilic, with PTFE
