For optimal results Minisart® filters made of MBS housing provide high flow rates and lowest adsorption cha-racteristics. The MBS housing is color-coded for an easy pore size identification. Medical Use and Sterile Venting Special Applications Minisart® syringe filters are available in a broad range of pore sizes. They are
Minisart® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 to 12.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in
Minisart® SRP25 syringe filters. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50.
Minisart ® PP Syringe Filters offer essential elimination of particles from the sample prior to HPLC | UHPLC | ICP-MS or other chromatographic analysis, in addition to chemically robust polypropylene housing with inert, PTFE, RC, or Nylon membrane options. Wide range of filter areas; 0.07 cm 2, 1.7 cm2 and 4.8 cm 2; Maximum chemical resistance; Low extractables; Shop Minisart ® PP Syringe Filters
Aijiren 0.45um ptfe filter with high quality-PTFE Membrane Filter 0.22um 0.45um 25mm Syringe Filter Nylon,Syringe Filter For Lab - 2.Filter diameter have 13mm and 25mm two types. Filtration membrane aperture has 0.22, 0.45um 3.Membrane material has:RC, Nylon, PVDF, PTFE, PP, etc. Choose proper membrane is very important.
Due to the asymmetric membrane structure, the PES surface almost behaves like a pre-filter. Both Minisart® types NML and High Flow can be sterilised by ethylene oxide (EO) or gamma irradiation. Minisart® Air and Minisart® HY contain a hydrophobic PTFE membrane suitable for venting but also for filtration of oily liquids.
Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning. Feature a coating-free, hydrophobic PTFE membrane that is chemically inert.
Minisart® RC Syringe Filters, Sartorius. Minisart® RC with hydrophobic PTFE is optimized for aqueous liquids and solvents with a pH of 3 to 14 and is stable against DMSO. The RC membrane is the best option for reliable and leachable free sterilization of liquids. The very low non-specific binding characteristics of this membrane makes it a
Consistent high quality of Sartorius Membrane Filters, Minisart® syringe filters is assured by careful selection of the raw materials, well-planned and validated production technol-ogies and an exceptionally efficient Quality Assurance Department, all of which results in high batch-to-batch reproducibility. The test
plastic PTFE membrane filter 0.2 um Advantec-Analytical Minisart® SRP15 Syringe Filter 17558-----K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14.
Sartorius, 17559----------Q, Minisart 0.45um,SRP15 Syringe Filters, Polytetrafluorethylene,500pcs. Minisart® SRP syringe filters with a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis, which require an even more chemical
Home » News » HPLC Syringe Filter » Sartorius minisart 0.2 micron hplc syringe filter factory China Syringe Filter, Syringe Filter Manufacturers, Suppliers China Syringe Filter manufacturers - Select 2021 high quality Syringe Filter products in best price from certified Chinese Water Filter, Industrial Filter suppliers, wholesalers and
Sartorius, 17574----------K, Minisart 0.45um, SRP15 Syringe Filters, Polytetrafluorethylene,50pcs. Minisart® SRP syringe filters with a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis, which require an even more chemical
