Acrodisc Syringe Filter, 0.2 µm, wwPTFE membrane, 25 mm (200/cs) Syringe Filters Millipore SLLGH25NB Millex-LG, 25 mm, 0,2 µm, hydrophilic PTFE, 250/pk AP-4911 Acrodisc One Syringe Filter, 0.2 µm, wwPTFE membrane (200/pkg) Syringe Filters 4929
Acrodisc Syringe Filter, 0.2 µm, wwPTFE membrane, 25 mm (200/cs) Syringe Filters Millipore SLLGH25NB Millex-LG, 25 mm, 0,2 µm, hydrophilic PTFE, 250/pk AP-4911 Acrodisc One Syringe Filter, 0.2 µm, wwPTFE membrane (200/pkg) Syringe Filters 4929
Material Hydrophobic PTFE. Pore Size (µm) 0.5. Diameter (mm) 47. Bubble Point (PSI) 9.14. Bubble Point 0.63. Max Flow Rate (mL/min/sq cm) 60. Description Fluoropore Membrane, PTFE, 0.50 µm, 47 mm dia. Express PES® (polyethersulfone) is the fastest filtration; specifically designed for HTP. Durapore® PVDF (polyvinylidene fluoride) provides
Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore™ membranes provide broad chemical compatibility, high flow rates and consistency.
How technological advancements is changing the dynamics of United States PTFE Membrane Filters Market review. Know more about the key market trends and drivers in latest broadcast about United States PTFE Membrane Filters Market review from HTF MI. Now Fasten your Business Research with our in-depth research enrich with detailed facts
Millipore® membranes have supported laboratory filtration in academic, pharmaceutical, and industrial sectors since the 1950s. We provide a range of membrane chemistries including MF-Millipore® mixed cellulose esters, Durapore® PVDF, Millipore Express® PLUS polyethersulfone, as well as hydrophilic and hydrophobic PTFE.
Durapore® PVDF (polyvinylidene fluoride) provides the lowest protein binding (99% recovery) MF-Millipore® (mixed cellulose esters) is the most widely used membrane for sterilization. PTFE (polytetrafluoroethylene) is ideal for filtration of nonaqueous solutions. Four different membrane types to match your application. MORE +.
Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency. Omnipore™ Membrane is hydrophilic PTFE compatible with
Millipore PTFE 0.2 micron filter for healthcare-Analytical Testing Vials. Low Cost PTFE Membrane Filters - Samples Available - Ships PTFE Membrane Filter, 55mm, Hydrophobic, 1.0 um, Used with EPA Method OTM 28 (Method 5 with 202), 50 per pack, SF17940. +8618057059123.
The Millipore Durapore® hydrophobic PVDF membrane filter provides high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophobic Durapore® PVDF membranes bind far less protein than nylon, nitrocellulose or PTFE membranes. Membrane filters are ideal for clarifying filtration of biological solutions applications.
Difference from glass fiber membrane, the PTFE filter is a kind of membrane material for deep filtration. The membrane filter disc has the following characteristics: membrane filter 0.22 μm is produced from food-grade isotactic polypropylene. No additives in the whole process; stable physical and chemical properties and good compatibility.
2 Bubble point of Fluoropore measured with methanol, Mitex. 3 Fluoropore with methanol; Mitex and LCR with water. For Omnipore 100 mL water, 20°C, 47 mm disk, 8.97" Hg vacuum. 4 Air flow rates for Mitex are for the number of seconds for 100 cm 3 of air to pass through 1 in 2 of membrane (Gurley test)
The Millipore Durapore® hydrophobic PVDF membrane filter provides high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophobic Durapore® PVDF membranes bind far less protein than nylon, nitrocellulose or PTFE membranes. Membrane filters are ideal for clarifying filtration of biological solutions applications.
