This 25 mm syringe filter with a hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 μm pore size used in low protein binding fine particle removal from aqueous & organic solutions. Hold up Volume (After Air Purge) <100 μL Outlet Style Male Luer slip
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile 0.45 µm pore size, 4 mm diameter, Millex-FH hydrophobic PTFE membrane; find Millipore-SLFHR04NL MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma
Gore-Tex is a brand of expanded PTFE (ePTFE), a material incorporating a fluoropolymer membrane with micropores. The roof of the Hubert H. Humphrey Metrodome in Minneapolis , US, was one of the largest applications of PTFE coatings. 20 acres (81,000 m 2 ) of the material was used in the creation of the white double-layered PTFE-coated fiberglass dome.
2017/10/15 · Many attempts have been made to increase the electrospun membrane hydrophobicity made from PVDF, PVDF-PTFE, PES and so on to overcome membrane wettability and increase permeate flux. Different functionalized nanoparticles have been used such as SiO 2, TiO 2, Carbon nanotube (CNT) and clay to increase membrane roughness and reduce membrane wettability , , , .
2021/6/22 · Overmolded polypropylene housing and optimized housing design Shop Merck Millipore 13mm Nonsterile Millex Syringe Filters - Hydrophobic PTFE Membrane at Fishersci.co.uk
Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33 mm, non-sterile This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic
Millipore Millex® in-line vacuum protection filter units feature a Fluoropore™ hydrophobic PTFE membrane filter which is ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. These 50mm diameter Millex® in-line filter units are also designed for vacuum line protection from moisture, particulates
Millex Syringe Filter, Fluoropore PTFE, Hydrophobic, Non-sterile 0.20 µm pore size, 33 mm diameter, Millex-FH hydrophobic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information. Description Catalogue Number SLFG033NK Trade Name
Membrane and depth filters offer certain Choosing the proper membrane device for your laboratory process is an important first step in any successful analysis. To help you identify the filtra-tion device best suited to your specific application we created a this®
Inline-Filter Millex ® PTFE Technische Informationen Typ Millex ®-FG Porengröße 0,22 µm Material Membran PTFE hydrophob Ø Membran 50 mm Material Gehäuse PP Filterfläche 19,6 cm² Betriebsdruck max. 4 bar Einsatztemperatur max. 121 C Designed for
Non-sterile Millex® syringe filters you can trust. Chromatography HPLC, IC, GC / General particle removal / Industrial / Environmental Membrane Diameter (mm) Pore Size (µm) Process Volume (hold-up) 50 units/pk 100 units/pk 250 units/pk 1000 units/pk PES
.jpg)
Millex® syringe filters with hydrophilic PTFE membrane provide the lowest IC extractable levels and broad chemical compatibility with both aqueous and organic solutions. Syringe filters are available in two pore sizes and two diameters to optimize results.
The Millex® HPF LCR syringe filter includes both a graduated glass fiber prefilter (10.0 to 0.7µm) to remove larger particles and a 0.2µm membrane filter for fine filtration. This combination of media provides two to four times greater throughput than standard syringe filters without prefiltration media, especially when filtering particle-laden solutions.
