Millex ® Syringe Filters with Hydrophilic PTFE Membranes. Millex ® Syringe Filters with Hydrophobic PTFE Membranes. Millex ® Syringe Filters with Hydrophilic Durapore ® PVDF Membranes. Millex ® Syringe Filters with PES Millipore Express ® Membrane. Millex ® Syringe Filters with Nylon Membranes.
2020/6/8 · 4. Rinse the filter funnel with sterile buffer, and turn on the vacuum filter again to allow the liquid to completely filter the filter membrane by vacuuming. 5. Flame sterilize the tweezers and remove the filter membrane from the filter funnel. 6. Place the filter in the
Available in Standard and Automation Compatible Packs. HPF Millex filters are available in boxes for individual sample filtration and in tubes for use on automated systems, including Zymark BenchMate™, Prelude™, MultiDose® Plus, and TPW™II workstations. The filters feature a pressure-resistant, domed housing and an optimized.
Millex-GP filters are recommended for sterile filtering protein solutions, tissue culture media, buffers and additives. Millex filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available. Use them to filter protein solutions. The 0.2 µm filters are sterilizing grade.
Millex® Syringe Filter Units with Hydrophobic PTFE Membranes. MilliporeSigma. 50% less hold volume than traditional 13 mm filters to ensure maximum sample recovery. A variety of membranes and polypropylene housings ensure chemical compatibility with a range of samples and solvents.
SYRINGE FILTER MILLEX-FG, MILLIPORE (PTFE Membrane, 0.2 µm, 25 mm, Sterile) This syringe filter is designed for venting and gas filtration purposes. This filter can be used in applications such as: Sterile filtering of gases, venting sterile containers, and in-line vacuum pump protection.
•illex-LCR filter contains a Millipore-exclusiveM hydrophilic PTFE membrane and are HPLC-certified for low levels of UV-absorbing extractables. They provide the cleanest sample for HPLC analysis. •Durapore® (PVDF) filters combine fast flow with low protein
This 25 mm syringe filter with a hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 μm pore size used in low protein binding fine particle removal from aqueous & organic solutions. Material Polytetrafluoroethylene Sterility Non-sterile Diameter (Metric)
Description. Millex™-LG, LCR filters contain hydrophilic PTFE membranes and are HPLC-certified. for low levels of UV-absorbing extractables. Hydrophilic PTFE membranes have broad chemical compatibility, enabling filtration of aqueous and organic solvents. 33 mm hydrophilic PTFE Millex™ filters have faster flow rates than 25 mm filters.
MilliporeSigma™ Millex™-FG Syringe Filter, 0.20µm, Hydrophobic PTFE. Features a hydrophobic Fluoropore™ (PTFE) membrane. Millex™-FG Syringe Filter, 0.20µm, Hydrophobic PTFE provides broad chemical compatibility and is ideal for filtering samples in organic solvents or to prevent back-streaming of atmospheric moisture in venting applications.
membrane in your Millex® syringe filter, refer to the table below. Filter Membrane Application LG 0.20 µm hydrophilic PTFE (polytetrafluoroethylene) Filtration of protein-containing solutions, and aqueous or organic solutions LCR 0.45 µm hydrophilic PTFE GV 0
