MS®High flow cartridge filter is coreless, single open-ended which can be wide used in different applications. Besides the feature of small resistance of pressure and high flow rate, our filter system has large diameter and large filter area thus reduce use quantity and filter size.
PTFE is the most efficient membrane for handling organic solvents, strong acids and alkalis. This Membrane Roll material can handle temperatures up to 120 degrees celsius and is recommended for detecting presences of corrosives, aggresive solvents and fluids in HPLC analysis.
The highly asymmetric membrane pore structure provides high flow rate at low pressure drop. Constructed using high purity polypropylene hardware and support layers. PSH-Series cartridges offer outstanding performance value. Manufactured in a clean-room environment to maintain high standards of purity and cleanliness
High Strength, Long Life Sterilizing Filters for Air and Gas Description Emflon® PFR filters have been developed from the successful Emflon filter range launched in 1981 and widely used as air and gas sterilizing filters in the pharmaceutical and biotechnology industries. The double layer PTFE membrane is inherently hydrophobic,
The enhanced ePTFE membrane offers exceptionally high gas flow rates at low pressure differentials. Fluorofil™ cartridges are recommended for sterile gas filtration and venting applications. The hydrophobic characteristics of the ePTFE membrane makes the Fluorofil™ filter cartridge particularly suitable for wet gas sterilising applications
Ideal for Use in Air/Gas and Vent Applications with Proprietary, Low Pressure Drop Hydrophobic PVDF Membrane Emflon II membrane filters have a removal rating of 0.2 μm in liquid service and less than 0.02 μm particulate for air/gas applications. Connects easily to hoses of various sizes in-line or as a final filter.
Quartz: Quartz filters have fine porosity capable of retaining of 0.6 µm particles with 99.999 percent efficiency at a flow rate of 5 cm per second. Heat-treated filters are available for high-temperature applications. If you need assistance choosing the best product for your sampling application, please contact Zefon International directly.
Jan 24, 2017 · Filtration flow rate are determined based on air to cloth or gas to cloth ratio, or flux of filter element or filter media.While designing an adequate filtration system one has to be careful for selection of filter media or filter element. Each filter media has it’s own air permeability or flux.
Nexflo GD/X Filters Less Pressure Required Comprise of 4 Layers of Membranes Volume of Sample filtered can be 3-7 times more than conventional filters Designed to filter solutions with high solids content or hard-to-filter viscous samples with Less Pressure and Fast Flow Rate
SKC offers two types of polytetrafluoroethylene (PTFE) filters: 60.0, 10.0, and 5.0-µm pore size PTFE filters are pure PTFE microfibers fused together at intersection points. These hydrophobic membranes provide ultimate chemical resistance and are temperature stable to 500 F (260 C).
Syringe Filters, Membrane Filters, Nylon, PTFE, PES, PVDF Syringe Filters , Gridded MCE Membrane Filter, Sample Vials and other high-level laboratory consumables products, All Syringe Filters, Membrane Filter , Gridded MCE Membrane Filter, Sample vials are produced according to ISO9001 standard system.
Combined with high flow rates and excellent de-wetting characteristics, Emflon PFR membrane delivers very economical filtration through smaller installations and reduced energy costs. In addition, the filters can be tested in-situ by the Forward Flow integrity test or a Water Intrusion test. Both tests are correlated to the liquid bacterial
MS®PTFE membrane for filtration including hydrophobic membrane and hydrophilic membrane, can be widely used in the filtration of gas and liquid. FEATURES&BENEFITS . Inherently hydrophobic; High flow rate; High precision; Ultraclean, non-shedding membrane; Long autoclave life - minimizes costs ; High chemical and thermal resistance; ISO 9001
Recently a new application required a larger flow rate at lower pressure so we designed a new sized housing for them. The SML304 series uses a larger 89mm diameter PTFE membrane so the sample flow rate can be greatly increased. The lower pressure rating (35 bar) allows the housing to be smaller and gives a big cost saving.
Aug 07, 2018 · Hydrophilic membrane with limited resistance to organic solvents, but is strong and flexible, with a high flow rate. Cellulose nitrate is compatible with some solvents that cellulose acetate is not. DO USE: for acetic acid, carbon tetrachloride, chloroform, cresol, and phenol.
