Difference between hydrophilic and hydrophobic filters. Hydrophilic filters are easily wet with water. Hydrophilic filters can be wetted with virtually any liquid, and are the preferred filters for aqueous solutions, as appropriate by compatibility. Once wetted, hydrophilic filters do not allow the free passage of gases until the applied
Sartorius Minisart SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning Feature a
Reliable and Ultrapure and our coating-free hydrophobic PTFE membrane used in Minisart ® SRP are exceptionally pure compared with other common filter membranes. Clean & Green Our regenerated cellulose (RC) membrane used in Minisart ® RC, our nylon (polyamide)
PVDF filter membrane has very low protein adsorption and high flow rate, the price is reasonable. Contact us to get the best quotation! Description of PVDF Membrane Filters PVDF membrane filter has a good heat resistance and chemical stability.PVDF filter can withstand high-pressure steam sterilization at 128-142 and can withstand strong acids, aliphatics, aromatics, alcohols, aldehydes
Minisart SRP 25 25mm Pore size 0.2um Sartorius 17575--------ACK. With a chemical-resistant, hydrophobic PTFE membrane for high purification of solvents or aggressive liquids in HPLC or GC analysis. Low adsorption. With female luer-lock inlet, male luer slip outlet. Non-sterile.
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with
Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Ve
Filters Minisart® Syringe 0.2um 25mm N/S PTFE pk 500 -. Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It
Millipore® membranes have supported laboratory filtration in academic, pharmaceutical, and industrial sectors since the 1950s. We provide a range of membrane chemistries including MF-Millipore® mixed cellulose esters, Durapore® PVDF, Millipore Express
Minisart® Air and HY with hydrophobic PTFE membrane are designed for the sterile filtration and cleaning of air and gases and are optimized for the venting of bags and containers, e.g. fermenters. Minisart ® Acticosart is designed for the ultracleaning of air and gases and contains active carbon for
Syringe filter Minisart SRP, PTFE With a chemical-resistant, hydrophobic PTFE membrane for high purification of solvents or aggressive liquids in HPLC or GC analysis. Low adsorption. With female luer-lock inlet, male luer slip outlet. Non-sterile. Product
Minisart® SRP (Hydrophobic PTFE) 25 mm PTFE PP 0.2 µm Male Luer Slip White, Printed Yes 50 17575-----ACK Minisart® Features – Pore size + membrane color-coded – Lowest adsorption – Superior flow rate – High total throughput – Low hold-up volume ...
Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
