The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Hydrophobic PTFE Membrane Filters / Type 11806
The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Hydrophobic PTFE Membrane Filters / Type 11806
.jpg)
Hydrophilic PTFE membrane filter bubble points are above or equal 0.1MPa and 0.06MPa respectively, pore size is 0.22μm, 0.45μm and with diameters ranging from 13mm, 25mm, 47mm to 90mm, 142mm, 293mm. PTFE membrane chemical compatibilities are superior to aqueous, organic solvents, and mixed solvents.
Nylon filter membrane, 47 mm diameter, 0.20 µm pore size, 100/pk 5191-4341 Description Part Number PTFE filter membrane, 47 mm diameter, 0.45 µm pore size, 100/pk 5191-4336 PTFE filter membrane, 47 mm diameter, 0.20 µm pore size, 100/pk 5191-4339 Nylon (polyamide) • Hydrophilic membrane suitable for particle removement of alkaline
Advantec MFS. Filter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal. Related Products:
PerkinElmer. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure. Related Products: Syringe Filter 0.22.
hydrophilic ptfe membrane filters Media – Polytetraflouro ethylene (Hydrophilic) with PP support Hydrophilic PTFE Disc Filters are chemically and biologically inert and stable up-to 260ºC and will with stand most concentrated acids and bases.
Jul 09, 2019 · Hydrophilic PTFE membrane filter is mainly used in: 1. Analysis of water samples to isolate RNA. 2. Clarifies filtered acid, alkali, and cryogenic liquids and dilute protein solutions. 3. Filtration of mixtures suitable for HPLC mobile phase and other water systems and organic solvents. Click here to know Membranes Filters: MCE, Cellulose
The 50 mm Millex® filter units are especially useful for vacuum line protection. All units are bi-directional. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized.
Aijiren PTFE membrane filter for gasses-PTFE Membrane Filter Permanently hydrophobic filter material, perfectly applicable for air and gas as well as non-polar liquids. PTFE membranes are characterised by an extraordinary chemical resistance versus nearly all chemicals and are suited for both filtration of acids or aggressive solvents and particle filtration of air or water samples up to 200° C.
Foxx Life Sciences. EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical.
This material has a maximal chemical and pH resistance and optically clear when wet with water. Hydrophilic PTFE syringe filter is a versatile filter for aqueous and aggressive organic solvent-based solutions and especially ideal for HPLC operation. Pure polypropylene housings and color-coding housings include smooth rim or gear rim are all
