high flow rate ptfe membrane for solvents

Hydrophobic PTFE membrane offers exceptionally high gas flow rates at low pressure differentials. STERIPleat Vent cartridges are recommended for sterile gas

Nupore VFPE vent filters are disposable and compact devices with unique design. These filters provide high flow rate, high throughput and low protein binding. Special inbuilt PTFE vent ensures unique performance advantages in different applications in life

Advanced PTFE media Improves flow rate with ATF membrane design 10 nm retention rating optimized for high solvent chemistry applications at 14 nm – 20 nm device nodes Maintains wettability and excellent retention performance with a wide range

Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions. Features & Benefits: - Biologically and chemically inert - High porosity yields high flow rates - Hydrophobic and hydrophilic

solvents. High liquid flow rate. High protein binding capacity, which makes it unsuitable for protein recovery applications. Regenerated cellulose (RC) Hydrophilic membrane. Resistant to a very wide range of solvents. Suitable for use with either aqueous solutions

oroethylene (PTFE) membrane Excellent chemical resistance Low initial differential pressure, high flow rates and long service life Flushed with 18 M Ω-cm DI-water for 30 minutes at 7.57 l/min (2 gpm) with low TOC level Material Pleated hydrophobic polytetrafluo

Fluoroline SL-3 disposable filters are designed for the filtration of high-purity process fluids at flow rates of up to 2 liters per minute. Constructed of PTFE membrane on PFA supports, Fluoroline SL-3 filters are compatible with a wide range of acids, bases and non

2/8/2021 · 1. Material of membrane filter (chemical compatibility) When choosing a microporous membrane, the first thing to consider is chemical compatibility. HAWACH editor has chosen the most 10 frequently used filter membranes to discuss their features and applications. 1.1 Polyethersulfone membrane filterer (PES)

PTFE Membrane Filters. In an aggressive chemical sampling environment, PTFE membrane filter from Simsii is the ideal choice. Our range of PTFE filters is designed with strong inherent properties and smooth surfaces. These filters are resistant to strong acids, solvents, and bases. They have a low tare mass to ensure accurate gravimetric analysis.

PTFE membrane filters are strong and resistant to acids, bases, and solvents, and stable at high temperatures. With their low background and low tare mass they are ideal for gravimetric or aerosol/gas/vapour sampling. They are also available in preloaded, leak

Hydrophilic PVDF membrane features very low protein adsorption, high flow rate and porosity. PVDF membrane is ideal for sterilization of medium and protein solution. Removal rating includes 0.10, 0.22, 0.45 and 1.00μm.

No need to pre-wetting for hydrophilic PTFE membrane High particle removal efficiency Narrow pore size distribution ensures the ultimate in retention and flow rate Wide range of removal ratings High flow rates and long service life Excellent chemical compatibility

PTFE Filter membrane ptfe without support layer and PP as the supporting material of the composite hydrophilic membrane, due to its strong hydrophilicity and chemical compatibility, it can be widely used to filter various aqueous solutions, such as: strong acid, strong alkali, etc. Product Characteristics 1.Strongly hydrophilic 2.Extremely good chemical compatibility,compatible with almost all

Hydrophilic PVDF Membrane filter for liquids sterile filtration, absolute rating ≥99.99%. part.4 High throughput flow rate with minimal differential pressure.

22/2/2021 · Hydrophilic membrane. Limited resistance to organic solvents. High liquid flow rate. High protein binding capacity, which makes it unsuitable for protein recovery applications. Regenerated cellulose (RC) Hydrophilic membrane. Resistant to a very wide range of