15/9/2020 · HIGH FLOW TETPOR II gas sterilization filters have been developed to benefit from technological advances within the manufacturer of PTFE membranes. This new generation of filter sets the standard with an unrivalled combination of efficiency, flow rate and strength.
Flow Rate: Defined as the time required for the flow stream to pass through the filter, flow rate may be measured for air or liquid. Flow rate generally decreases with smaller pore size, but altering membrane material, thickness, porosity, and pore architecture can lead to differences in flow rate.
PVDF filter membrane has very low protein adsorption and high flow rate, PVDF membrane price is reasonable. Contact hawach.com! Description of PVDF Membrane Filters PVDF membrane filter has a good heat resistance and chemical stability.PVDF filter can withstand high-pressure steam sterilization at 128-142 and can withstand strong acids, aliphatics, aromatics, alcohols, aldehydes, ketones
Membrane code Pore Size(um) Membrane material Support material Thickness(um) Flow Rate (@1psi) Phobicity MSPTFE010BOX 0.1 PTFE pp 180-240 ≥0.1slmp oleophobic MSPTFE022BOX 0.22 PTFE pp ≥0.2slmp oleophobic MSPTFE045BOX 0.45 PTFE
General description. Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.
These independent ready-to-use Syringe Filters with pes/Nylon /PTFE/PVDF membrane filters have excellent flow speed and high filtrable volume. Minisart high flow syringe filter for rapid volume sterilization with maximum user convenience.. Ready-to-use units
Catalogue Number. FHLP09050. Trade Name. Fluoropore. Description. Fluoropore Membrane Filter. Background Information. Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.
Acticosart Syringe Carbon Filter, 0.45 PTFE, pack/12Part Number: SRT-17840 DescriptionNon-sterile Minisart® Acticosart syringe carbon filters are packaged in convenience pack but can be sterilized using Ethylene oxide by the end user if necessary. Reduce waste and make handling easier whenever the application allows venting under non-sterile conditions. Due to its hydrophobic nature the PTFE
High flow rate and capacity. Non-sterile FC800-60 0.2µm pore size Sterile FC800-65 0.45µm pore size Syringe Filter, Minisart High-Flow With asymmetric, single-layer, high flow poly-ethersulfone (PESU) membrane giving exceptional chemical stability. Large2
Syringe Filter 13,25,33MM 0.22,0.45um PTFE PTFE syringe filter provides high flow rate, best chemical compatibility and low protein binding, ideal for aqueous solutions and solvents filtration, especially aggressive solvent as well as air filtration. Read More
Hot Selling 0.45um 13mm Ptfe Minisart Syringe Filters , Find Complete Details about Hot Selling 0.45um 13mm Ptfe Minisart Syringe Filters,Minisart Syringe Filters,Ptfe Minisart Syringe Filters,0.45um 13mm Ptfe Minisart Syringe Filters from Other Lab Supplies
Minisart® High Flow with hydrophilic PES membrane offers highest flow rates and is optimized for filtration of additives and cell culture buffers. Article 16553-K with 0.1 µm is suitable for Mycoplasma removal. Minisart® NML with surfactant-free cellulose acetate
removal of larger particles. Minisart® High Flow with polyethersul-fone (PES) is optimal for highest flow rates and a pH of 1–13. Due to the asymmetric membrane structure, the PES surface almost behaves like a pre-filter. Both Minisart® types NML and High
Fluoryte™ High Flow Filter. The Pall Fluoryte High Flow Filter is an all fluoro-polymer 1 cartridge. The filter cartridge uses the latest generation of high permeability proprietary PTFE membranes. The filter media encapsulation design was developed using Pall’s unique computer aided design modeling system. This advanced fluid dynamics
Manufacturer: Sartorius Corporation. For sterile filtration and particle removal and ultracleaning. Ready-to-use syringe filters with PES membrane have excellent flow speed and high filterable volume. Offer flow rates at low inlet pressures, allow for a correspondingly rapid sterile filtration. Specifications. HPIS Code. 530_40_60_0. Latex Free.
