Disposable filters are 0.2 micron rated and contain a Pall hydrophobic PTFE membrane and are ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates and filters can be autoclaved several times
Fluoropore Membrane Filter 3.0 µm pore size, hydrophobic PTFE, 47 mm membrane; find Millipore-FSLW04700 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich Our Fluoropore ® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter
Catalogue Number. FHLP09050. Trade Name. Fluoropore. Description. Fluoropore Membrane Filter. Background Information. Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.
High-purity PTFE membrane filter media provides superior chemical resistance for a broad range of industrial applications. With retention ratings as fine as 0.01μ (10 nanometers), consistent contaminant removal is achieved in aggressive fluids and organic solvents.
The pleat technology maximizes the useful surface area of the filter while maintaining proper flow paths between media pleats. These CHM® cartridge filters are manufactured with PTFE and polypropylene support media, both materials are chemically inert non-shedding and biologically safe according to FDA, USP and EEC requirements for pharmaceutical and food contact use.
Our GMS305 series offers an 89 MM membrane for extremely high flow sample systems requiring zero liquid entrainment. It is available with either 1/8” or 1/4” FNPT connections. The GMS305 is typically protected by a coalescing filter for added security.
Membrane Solutions Address: 1108 Spring View lane Plano, TX 75075 Toll Free: 866-528-4572 Fax: 732-412-4040 www.membrane-solutions.com Feature and Benefit · Prefilter and Final filter grades, high flow rates and low pressure drop all chemicals
Product description. TEM-200 Series Gas Filters. TEM-200 Series filters are specifically designed for filtration of semiconductor gases when flow rates to 200 SCFM are required. This all-welded assemply will deliver 0.003 micron absolute filtration where a high flow rate is required and space is limited. Available with 1" and 1.5" connections.
TEM-500 Series Gas Filters. TEM 500 Series filters are specifically designed for filtration of semiconductor grade gasses where flow rates to 25 SCFM are required. This all welded asswmbly will deliver 0.003 micron absolute filtration where a high flow rate is required and space is small. This PTFE membrane cartridge is encapsulated in a 316L
General description. Filter Code: FSLW. Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency.
Fluoropore Membrane Filter 0.22 µm pore size, hydrophobic PTFE, 142 mm membrane; find Millipore-FGLP14250 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich Our Fluoropore ® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the
