Advantec catalog_Vol 15_LT.pdfMEMBRANE FILTERS. 10. Hydrophilic PTFE. • Characteristics: Maximum chemical and pH resistance. • High flow rates with minimal aqueous extractables
Membrane filters or “membranes” are microporous plastic films with specific pore size ratings. Ultrafiltration Membranes. Advantec Ultrafilters are anisotropic permselective membranes that segregate dissolved solutes at the membranes surface on a basis of molecular weight
Advantec ptfe membrane Membrane Filters | Kou Hing Hong Scientific Supplies Ltd. Thin membranes with high porosity: Uniformly thin membranes (typically 150 μm) with high porosity (about 80%) provide high gas and liquid flow per unit area.
All Advantec membranes are Triton-free except Nylon. • Thin membranes with high porosity:Uniformly thin membranes (typically 150 μm) with high porosity (about 80%) provide high gas and liquid flow per unit area. High porosity also provides high surface area for adsorption or binding • Thermostable: All Advantec membranes can be sterilized
Fluoropolymer Cartridge Filters High Flow Rate with a Long Service Life TCF-L Type - ADVANTEC The filtration area is increased 1.8 times compared to the conventional products. The provides higher performance for process applications with it high flow rate and long service life.
High-efficiency pleated polypropylene (pp) filter cartridges provide more surface area for higher flow rate and longer life. Designed for food & beverage, pharmaceutical, semiconductor and other demanding process applications, the all pp construction and gradient density microfibre media provide excellent removal efficiencies and high contaminant holding capacities.
Hydrophobic PTFE Membranes. PTFE T-type membrane is manufactured in a unique way where polytetrafluorethylene (PTFE) is expanded both uniaxially and biaxially. The resultant Hydrophilic PTFE Membranes. Hydrophilic PTFE H-type membrane is a thin, unsupported porous film which is treated to be hydrophilic.
Advantec Hydrophilic PTFE membrane filters are ideal for HPLC and other mixtures of aqueous and organic solvents. This non-supported membrane is very thin and optically clear when wet. Thermostable up to 100 °C. PTFE offers maximum chemical and pH resistance to strong acids and alkalis. High flow rates with minimal aqueous extractables (<0.3 wt%).
Hydrophobic PTFE Membranes. PTFE T-type membrane is manufactured in a unique way where polytetrafluorethylene (PTFE) is expanded both uniaxially and biaxially. The resultant membrane is thin, highly porous, and behaves as an absolute retentive membrane. Unsupported PTFE membranes offer maximum chemical and pH resistance to a broad range of
Non-Sterile Mixed Cellulose Esters Membrane Filters - White, 0.45µm. Advantec MFS. Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages, and air monitoring. MCE membranes offer high recovery rates and superior flow rates.
