The 100% polypropylene construction of Memtrex PM absolute pleated cartridge filters offers low extractables, long service life, and broad chemical compatibility. Thermoplastic sealing techniques are used in the cartridge construction, eliminating the need
1. Determine the particle size to be retained or filtered. Membrane will retain all particles equal to and larger than their designated pore size. 2. Assess the chemical compatibility of the membrane filter with the liquid or gas to be filtered. Consider the chemical 3.
CHM® MRC - Regenerated Cellulose membranes for the filtration of organic solvents. These solvent-resistant hydrophilic membrane filters are excellently suited for particle removal from solvents. Often used for ultra-cleaning and de-gassing solvents and mobile phases for HPLC in combination with the All-glass holder (for our references FS047300T and
Solvent Ink Filter 5inch 0.1um Ptfe Filter Membrane , Find Complete Details about Solvent Ink Filter 5inch 0.1um Ptfe Filter Membrane,Inkjet Ink Filter With 0.1um Ptfe,Solvent Printer Ink Filter,0.1um Ptfe Ink Filter from Water Treatment Supplier or Manufacturer
PTFE is a hydrophobic membrane and chemically resistant to virtually all solvents. It can be used for working with aggressive media such as strong acids, alcohols, bases, aromatics. The units are ready-to-use and allow for simple, rapid and reliable ultra-cleaning of small volume samples for HPLC or
Product Description. MS ® hydrophilic PTFE membrane with excellent and permanent hydrophilicity, high porosity, best chemical compatibility and low protein adsorption,it is an ideal material for filtration of aqueous solutions and solvents. MS has developed PTFE membrane and PTFE surface modification technology for 7 years.
Housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. Able to filter solutions at temperatures up to 100˚C. Convenient and Easy to Use. Syringe filters can be sterilized by autoclave at 125˚C for 15 minutes.
3.Pore size of filter media are available from 0.1μm, 0.22μm, 0.45μm, 0.65μm, 0.8μm, 1.0μm, 3.0μm, 5.0μm, 10μm. 4.Two layer syringe filters with 1 μm Glass Fiber or PP pre-filter also available. 5.Housing Diameter can be choose from 4mm,13mm, 25mm, 33mm,50mm. Product Parameters.
PTFE membranes are extremely resistant to aggressive solvents and acids and can be used to filter particulate from both liquid and gas samples. Regenerated Cellulose (RC) Regenerated cellulose membranes are resistant to solvents and are hydrophilic. 0.45 μm pore size is typically used for HPLC sample preparation.
Product Description. MS®FluorPure PTFE Micro cartridge filter uses a natural hydrophobic PTFE membrane,and surface-modified PTFE membrane also can be chose, have broad chemical compatibility, along with non-woven support that provide an economical alternative to all fluorine media cartridges.
Certifications/Compliance. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Color. Yellow. Description. 0.45 um, 17 mm, 100 Pk. Diameter (Metric) 17 mm.
Choose membrane type. Nylon - Broad solvent compatibility, Aqueous and organic materials. PTFE - Ideal for HPLC, UHPLC sample preparation and excellent solvent resistance. PES (Polyethersulfone) - Highest flow rates, ideal for Ion chromatography, low protein binding for biological samples.
Roll Micro Pore Ptfe 0.22um Filter Membrane For Gas , Find Complete Details about Roll Micro Pore Ptfe 0.22um Filter Membrane For Gas,Pes Membrane Filter,Hydrophilic Pes Membrane,Pes Membrane from Water Treatment Supplier or Manufacturer-Hawach
NNF series filter cartridge utilize Nylon 6,6 membrane which can be used to filter most organic solvent, such as alcohols, hydrocarbons, ethers, ketone, benzen, etc. Due to the high hydrophilicity and excellent adsorption capacity, NNF series can effectively remove micron-structured particles in all
