Discounting PTFE membrane filter for medicineDiscounting PTFE membrane filter for medicine. 100pcs/Box Disposable PP Needle Filters with PTFE/PES/Nylon Discounting 0.22 um syrin +8618057059123. Email: market@aijirenvial.com. 16mm, 25mm Test Tubes for Water Analysis
Advantage of PTFE TEFLON MF & MRB Membrane: 1.High Porosity 70-90%，Excellent Hydrophilic，Large flow rate (recommend MBR:20~50LMH，MF:40-200LMH) 2.TEFLON, Best Material for Anti-Pollution, Max.TSS up to 40g/L, and Excellent Oil Resistance. 3.Excellent Chemicals Resistance, Strong Alkali &Acid (pH=O~14)，High Oxidant Resistance.
PTFE deammonia nitrogen membrane is a high-performance hydrophobic microporous membrane. The specific process applied to the treatment of high ammonia nitrogen wastewater is as follows: adjust the pH value of the wastewater to free ammonia nitrogen in the form of NH3. When the high ammonia nitrogen wastewater passes through the pipe side of the
Hydrophobic PTFE. These filters are highly porous, thin, and they behave as absolute retentive membranes. They remain inert even with strong bases, strong acids, and solvents which are chemically aggressive. You can use these membrane filters for sterilizing gases, venting gas and air, or for clarifying and sterilizing strong acids or solvents
PTFE membrane filter is made of polytetrafluoroethylene ultrafine fibers by hot-melt bonding together. Difference from glass fiber membrane, PTFE filter is a kind of membrane material for deep filtration. Membrane filter disc has the following characteristics: membrane filter 0.22 μm is produced from food-grade isotactic polypropylene.
Membrane Solution's advanced PTFE membranes (pore size:0.03-5μm) achieve the perfect combination of high flow rate,high retention and cost-effective. Material characteristics of MS®PTFE membrane include small diffusion flow and more pores in any given area. MS®PTFE membrane for filtration including hydrophobic membrane and hydrophilic
PTFE Membrane Filter, Pore Size:0.1(μm), Diameter:13(mm) 400(pcs) 72.00 »Add to Cart: MFPTFE013022B: PTFE Membrane Filter, Pore Size:0.22(μm), Diameter:13(mm) 400(pcs) 72.00 »Add to Cart: MFPTFE013045B: PTFE Membrane Filter, Pore Size:0.45(μm), Diameter:13(mm) 400(pcs) 72.00 »Add to Cart: MFPTFE013080B
PTFE Membrane innovation expert. PTFE membrane (Polytetrafluoroethylene) technology uses patented and proprietary processes to sinter then skive PTFE into rolled membrane materials that can then be converted into numerous other forms. Our controlled processes enable us to manufacture a unique porous PTFE membrane with unmatched properties.
Ammonia Remove Membrane. The outer side of porous PTFE hollow fiber membranes is powerfully hydrophobic (water-repelling) and suited for ammonia remove membrane. Membranes with air-filled holes are near water-impervious but highly permeable to some chemical gases, e.g., ammonia. The film wall with the dry pores is an ammonia/liquid edge.
Two new PTFE membranes are being introduced - the M3 and M4 oleophobic grades. Based on our proven hydrophobic PTFE membranes the new grades are actually hydrophobic and oleophobic. This means their use will prevent both water and oil carry-over giving further protection to analysers.
