Hydrophobic PTFE Membrane Filter PTFE membrane with supporting layer polyester or polypropylene Suitable for applications involving aggressive organic solvents, strong acids, and alkalis Pore size: 0.22μm-5μm, Diameter: 13mm-293mm Hydrophobic nature of
Polytetrafluoroethylene PTFE Membrane Disc Filter Product Code: F62208 | Size: 50X4.6mm Solvent Clarification Sample preparation for HPLC Filtration of corrosive products Ventilation Microelectronics Call Us or fill the form +91 99978625620 Don't hesitate ...
Filter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal Related Products: Ptfe Membrane Filter
Hplc Solvent Filter found in: Solvent Inlet Filters, Solvent Inlet Filter for Aijiren HPLC Systems, Solvent Filters for /12/54A Pumps, Solvent Filters.. with a Foxx 25mm, 0.2μm PTFE Filter for safe vapor filtration. The Air Inlet Valve and PTFE Filter blocks out all harmful solvent vapors while also absorbing incoming contaminants from the incoming air.
PTFE Membrane Disc Filters Pall Laboratory accurate gravimetric determinations with low tare mass Zefluor™ membrane, available in 0.5 μm pore size Ideal for filtration of gas and/or organic solvents Applications: For air monitoring and sampling in aggressive environments Supported membrane
Milliseal Membrane Seal, PTFE, 18 mm This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration.; find Millipore-FWMS01800 MSDS, related peer-reviewed papers, technical
Unlaminated Fluoropore (PTFE) Membrane Filter Product No. Description Pore Size Filter Diameter ( ) Pack Size Add to Cart FHUP04700 Fluoropore Membrane Filter, PTFE, hydrophobic, unlaminated, 0.5 µm, 47 mm, white, plain 0.45 µm 47 mm 100
Use the information in this table to determine the ability of a specific membrane filter to withstand exposure to a solvent. All concentrations are 100% unless noted. Legend: C = Compatible LC = Limited Compatibility (Membrane may swell and shrink) IC = Incompatible (Not Recommended)
Reference table to guide membrane selection based on application area. Choosing the Appropriate Membrane. A list of questions to consider when selecting a membrane filter. Chemical Compatibility Chart. Review our chemical compatibility chart before choosing your filter. Standard Method and Application Guide.
Description of PTFE Membrane Filters PTFE membrane filter is made of polytetrafluoroethylene ultrafine fibers by hot-melt bonding together. Difference from glass fiber membrane, PTFE filter is a kind of membrane material for deep filtration.Membrane filter disc has the following characteristics: membrane filter 0.22 μm is produced from food-grade isotactic polypropylene.
EZFlow 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical compatibility, they are ideal for the filtration of solvents and acids or other aggressive chemicals.
Compact filter for venting and solvent filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up
