Corning syringe filters are 100% integrity tested and are certified nonpyrogenic and noncytotoxic and are manufacturered in accordance with ISO 9002 standards. A variety of membranes are available to meet your needs. PES for low protein binding and faster flow rates; surfactant-free cellulose acetate (SFCA) for the lowest protein binding; PTFE for chemical resistance; and regenerated cellulose (RC) the best choice for DMSO compatibility.
Teflo Membrane: TF (PTFE) Membrane: Filter Media/Support: PTFE with PMP (polymethyl-pentene) support ring: PTFE on a polypropylene support: Typical Thickness: 1 μm: 76 μm (3 mils) 2 μm: 46 μm (1.8 mils) 3 μm: 30.4 μm (1.2 mils) 0.2 μm: 139 μm (5.5 mils) 0.45 and 1 μm: 135 μm (5.3 mils) Typical Air Flow Rate L/min/cm2 at 0.7 bar (70
The Disc Filter utilizes replaceable Zitex™ filter elements which form a continuous mat of PTFE fibers. These fibers are fused together to form a screen-like membrane structure. The resultant membrane is hydrophobic and hence aqueous suspensions must be filtered at high rates to overcome surface tension.
The larger 50 mm diameter disc filter has a PTFE membrane and polypropylene housing with hose barb connectors. This product is ideal for filtering aggressive solvents or gases and applications requiring sterile venting of gases.
PTFE is optional. Nylon membrane retaining ring completes seal. A Unique Concept in Lab Filtration Apparatus Fritted Glass Discs Filtration Apparatus Fritted filter disks for Ace Membrane Filtration Apparatus. Special tight outside diameter and tolerance to fit 3702-10 and 3700-10 filter adapters. Porosity A (145-174 microns) Porosity B (70-100
Syringe/Disc Filters The smaller conventional Corning® syringe disc-type filters (4, 15, 25, 26, and 28 mm diameter) are used with syringes which serves as both the fluid reservoir and the pressure source. They are 100% integrity tested. The HPLC-certified non-sterile syringe filters are available with nylon, regenerated
was. $41.30. Add to Cart. + Wishlist Compare. Refer Friends. Details. EZ Flow 25mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical
Our hydrophobic PTFE membranes and housings are ideally suited for separating liquid from gas molecules, allowing a pure gas sample to be produced. A porous PTFE membrane is supported by a sintered, porous stainless steel disc on the outlet side to increase the strength of the membrane and give a higher differential pressure. Two liquid phases
Product Number 431227. E-mail Print. Quality Certificate. These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance. These naturally hydrophobic membranes can be used for venting applications or filtering gases. 100% integrity tested, sterile and nonpyrogenic and noncytotoxic.
The hydrophilic PTFE membranes are able to maintain filtration integrity, reduce interference with biological processes, and maximize shelflife. Sterlitech's hydrophobic PTFE can also be used for filtering aqueous solutions, if pre-wetted with alcohol. We provide the filters and technical support to help you take your breakthrough product from
This Corning syringe filter has a polypropylene copolymer housing, a hose barb inlet, and a hose barb outlet. The polytetrafluoroethylene (PTFE) membrane provides the best chemical resistance. PTFE is naturally hydrophilic and can be used for venting applications. Manufactured in accordance with ISO 9002 standards.
